Exmark Lazer Z Operator's Manual page 37

5.1.12 Change engine coolant: (Kawasaki Liquid-Cooled Units only)
Service Interval: 4 years/4000 hours* – Dex-Cool© extended
* It is recommended to service at whichever interval happens first.
a) Stop engine, wait for all moving parts to stop, and remove key. Machine
must be positioned on level surface.
b) Tilt seat up and tilt hood forward to gain access to the cooling area.
POTENTIAL HAZARD
♦ Engine coolant is hot and pressurized.
♦ Radiator and surrounding parts are hot.
WHAT CAN HAPPEN
♦ Spray or steam from hot, pressurized liquid in the
engine cooling system and touching a hot radiator
may cause severe burns.
HOW TO AVOID THE HAZARD
♦ Allow the engine to cool completely before removing
the radiator cap or servicing any component of the
cooling system.
POTENTIAL HAZARD
♦ Engine coolant is toxic.
WHAT CAN HAPPEN
♦ Swallowing coolant can cause poisoning.
HOW TO AVOID THE HAZARD
♦ Do not swallow
♦ Keep out of reach of children and pets.
Drain coolant when engine is cool. Coolant may be drained from the radiator by
loosening the drain cock in the right rear corner. The engine block may be
drained by removing the rear radiator hose and/or by removing the drain plugs
from the engine block.
For 27 HP Kawasaki Liquid-Cooled units: The plug may be accessed from the
bottom left hand side of the engine. The plug may be identified as a hex head
bolt with a black finish. See Figure 6.
a) Re-install all drain plugs and hoses and tighten drain cock.
life coolant (orange color)
WARNING
CAUTION
FIGURE 6
COOLANT PLUG LOCATION
- 32 -