Continuous Shooting (Burst Mode) - FujiFilm X-M1 Owner's Manual

Continuous Shooting (Burst Mode)

Continuous Shooting (Burst Mode)
Capture motion in a series of pictures.
1
Press the selector down (I) when
the camera is in shooting mode.
STILL IMAGE
2
Press the selector up or down to
choose CONTINUOUS, and press left
or right to choose from frame rates
of approximately 5.6 fps (frames per
second) and 3.0 fps. Press MENU/OK
to proceed when settings are com-
plete.
5.6fps
3
Press the shutter button halfway to
focus.
4
Press the shutter button the rest
of the way down to start shoot-
ing. Shooting ends when the shut-
ter button is released, the selected
number of pictures has been taken,
or the memory card is full.
R Focus and exposure are determined by the fi rst
frame in each series. The fl ash turns off automati-
cally; the previously-selected fl ash mode is restored
when burst shooting is turned off .
R Frame rate varies with shutter speed and may slow
as more shots are taken.
R Additional time may be required to record pictures
when shooting ends.
R If fi le numbering reaches 999 before shooting is
complete, the remaining pictures will be recorded
to a new folder (P 85).
R Burst shooting may not begin if the space available
on the memory card is insuffi cient.
59