Edit Waypoints - Garmin GPS Kit Owner's Manual

To change the waypoint name:
1. On the MARK WAYPOINT page, press the UP or
DOWN Button to highlight the Waypoint Name
'001'.
2. Press ENTER. The EDIT WAYPOINT NAME Page
appears.
3. Press ENTER. Using the UP or DOWN Button, scroll
through the letter selections. Select 'H' and press
ENTER. Repeat this process and finish the word
'HOME'.
4. Press the UP or DOWN Button to highlight the 'OK'
field and press ENTER. The MARK WAYPOINT page
appears.
5. Press the UP or DOWN Button to highlight the 'OK'
field and press ENTER. Your location, named HOME,
is now marked and stored in memory.
F
As a shortcut tip, press and hold
NOTE:
to mark a waypoint.
ENTER
Now that you've marked your location, it' s time to go
for a brisk walk. Press the PAGE Button and switch to the
MAP Page
Walk in a straight line for 3-4 minutes at a fast
pace and watch the Map Page.
Your location is shown by the figure in the middle of
the screen. As you move, watch the animated figure walk,
and a line—called a "track"—appear along the path you
have just covered.
Now take a sharp right turn and walk at a brisk
pace for another 3-4 minutes.
Getting
Started

Edit Waypoints

You can create or edit a
waypoint on the EDIT
LOCATION Page. From
the MARK WAYPOINT
Page, highlight the Lat/
Lon field and press
ENTER. Then follow the
on-screen instructions.
The EDIT WAYPOINT
NAME Page.
15