Advertisement
Quick Links
DVD- ROM
S
p
e
c
i
f
i
c
a
t
i
o
n
S
p
e
c
i
f
i
c
a
t
i
o
n
Transfer Rate
Data Buffer
Drive Interface Type
Disc Data Capacity
Data Type
(Data Format)
DVD-ROM: 1385KB/s. (Normal Speed)
CD- ROM: 150KB/s. (Normal Speed)
512 KB.
E- IDE
DVD:
Single Layer
Dual Layer
DVD:
DVD-5, DVD-9, DVD-10 and DVD-R.
CD:
CD-Audio,
CD- ROM (mode 1 and mode 2),
CD- ROM XA (mode 2, form 1 and form 2),
CD- I (mode 2, form 1 and form 2),
CD- I Ready, CD- I Bridge, CD-WO, CD-RW, Photo CD, Video CD, Enhanced
Music CD
CD:
4.7GB
Mode 1
8.5GB
Mode 2
E-1
English
656MB
748MB
Advertisement
Related Manuals for AOpen DVD-ROM 512 KB
Summary of Contents for AOpen DVD-ROM 512 KB
- Page 1 DVD- ROM English Transfer Rate DVD-ROM: 1385KB/s. (Normal Speed) CD- ROM: 150KB/s. (Normal Speed) Data Buffer 512 KB. Drive Interface Type E- IDE Disc Data Capacity DVD: Single Layer 4.7GB Mode 1 656MB Dual Layer 8.5GB Mode 2 748MB Data Type DVD: (Data Format) DVD-5, DVD-9, DVD-10 and DVD-R.
- Page 2 DVD- ROM English First, turn off the system power, then please follow below steps to install the DVD-ROM drive. Adjust the Master/Slave jumpers on the rear side of the DVD-ROM drive as necessary. (The factory default mode normally should not be changed.) Screw the DVD-ROM drive unit into a free 5.25-inch drive bay.
- Page 3 DVD- ROM English The jumper is for selection of the drive use mode and supporting PC. Short-circuit socket is attached for the setting. (attached -> on; not attached -> off). Please refer to the following table. Master Slave Cable Select Pin Name State Function Description The drive is used in MASTER mode.
- Page 4 DVD- ROM English In most cases, software applications that utilize DVD- ROM drives control the DVD-ROM drive operations directly. However, you can control the drive manually using the front-panel controls. Please refer the following figures according to your drive. Type1 Headphone Jack Volume Control Power-on / Busy LED...
- Page 5 Dear Customer, Thanks for choosing AOpen products. To provide the best and fastest service to our customer is our first priority. However, we receiv e numerous emails and phone-calls worldwide everyday, it is very hard for us to serve everyone on time. We recommend you follow the procedures below and seek help before contact us.