Problem Solver - GE JGRS14 Use And Care Manual

QUESTIONS?
USE THIS PROBLEM SOLVER
PROBLEM POSSIBLE CAUSE
"F-AND A NUMBER • This is a functinn error code. Press CLEAR/OFF. Allow the oven to ¢ool one g
OR L_I'rER" FLASH hour. Place the oven back into operation, e_
IN THE DISPLAY - Disconnect all power to the oven for 5 minutes and then reconnect power. If the
failure code repeats, call fo_ service. (_
CONTROL SIGNALS - This is reminding you to press BAKE and then enter a temperature.
COOKINGAFTERENTERINGTIME OR *This is reminding you to ente_ a bake tempexature atier having pressed BAKE. _.
DELAy START TIME' Q'_
DISPLAY GOES BLANK • The circuit breaker in your house has been tripped, or a fuse has been blown.
DISPLAY FLASHES • Power failure. Reset the clock.
UNABLE TO GET TI_ • BAKE and BROIL HIA.O must be pressed at the same time and held for --
DISPLAY TO SHOW "SF" 2 s_onds.
CLOCK AND TIMER • Cheok for power outa_
DO NOT WORK
OVEN LIGHT DOES
NOT WORK
FOOD DOES NOT
BROIL PROPERLY
FOOD DOES NOT
ROAST OR BAKE
PROPERLY
• The fight bulb is loose or defective. Tighten or replace.
• The pad operating the oven light is broken. Call for service.
• The oven controls are not properly set. See the Br_lin_ section.
• Improper sbelf position being used.
• Food is being cooked on a hot parL
• Cookwaro is not suited for broiling.
• The oven door and/or the broiler compartment door not closed.
• Aluminum foil used on the broiler pan grid has not been fitted properly
and slit as t-ecommended.
• The oven controls are not properly set See the Baking or Roasting section.
• Shelf position is not com:ct.
• tnconect cookware or cnnkware of improper size is being used.
• Oven thermostat needs adjustment See the Adjust the Oven Thermostat--
Do It Yourse/fsection.
(conttnued next page)
25
t_
o
t_