Initial Start-Up; Booting The System; Starting Windows For The First Time; Connect To The Internet Or Network - Fujitsu LifeBook U772 Getting Started Manual

Initial Start Up
Opening the Display Panel
Connecting the AC Adapter
DC Power
Jack
Power Cord
Power / Suspend /
Resume Button
LAN Port
LAN Cable
LAN Adapter
Page 3 of 6
1. open the Display Panel
■ Ensure that your LIFEBOOK is on a hard level surface and that the air vents are not blocked.
■ Lift the display, being careful not to touch the screen.
■ Adjust the display until it is at a comfortable viewing angle.
2. Connect AC Power
■ Plug the power cord into the AC adapter.
■ Plug the AC adapter into your Ultrabook.
■ Connect the power cord to an electrical outlet.

3. Booting the System

■ We strongly recommend that you not attach any external devices until you have gone through the
initial power on sequence.
■ Press the Power/Suspend/Resume button.
■ The Ultrabook is now on and the battery is being charged.
■ W hen you turn on your Ultrabook for the first time, it will display a Fujitsu logo on the screen.
If you do nothing the system will load the operating system, and then the Windows®
Welcome will begin.
4. Starting Windows
■ A fter you boot up the system the first time and follow the instructions on the screen, you will
eventually come to the Welcome window. After the Welcome window appears, the screen will black
out for a few minutes. This is normal. DO NOT ATTEMPT TO POWER DOWN THE SYSTEM AT THIS
POINT. While the screen is blacked out, your system configuration is being set up and the necessary
AC Adapter
files are being installed.
■ D uring the course of the first start up, you will need to read and accept the End User License
Agreements (EULAs) for Microsoft and Fujitsu.
If you reject the terms of the license agreement you will be asked to review the license agreement for
information on returning Windows® or to shut down your Ultrabook.
You cannot use your Ultrabook until you have accepted the license agreement. If you stop the process your
Ultrabook will return to the beginning of the Windows® Welcome Process, even if you shut your Ultrabook
down and start it up again. Your Operating System sticker has been placed on a flyer instead of on your
Ultrabook. Ensure this flyer is stored in a safe place.
■ For Windows 8 Users:
Following first boot, you will arrive at the Metro start screen. Some useful shortcuts for your
reference: Press the Windows + D key to go to traditional Windows desktop. Press Windows + M key
to load the traditional Windows desktop and minimize all applications.

5. Connect to the Internet or Network

■ Turn on wireless by pressing Function (FN) and F5 key , or — Connect an Ethernet cable (not
supplied) through the LAN Adapter jack on your notebook and to a wall jack or to Ethernet
router (not included).
■ Register your lIfeBooK with fujitsu Service and Support via our website
(us.fujitsu.com/computers). This helps us to better serve you.
6. Activate Additional Utilities, Applications, & Drivers
■ You can launch desktop icon "Fujitsu Bonus Apps" to see if there are any additional application
available for the system. Bonus Apps contains optional applications. You can select individual or all
software that is available. BonusApps will automatically install for you.
7. Create backup media with System Backup and Restore
Depending on your configuration, recovery discs (for your pre-loaded factory image) may, or may NOT
be included with this Ultrabook. If your hard drive crashes or the computer system becomes corrupted,
you can use the recovery discs that you create to restore the system to its original condition.
(You will need to purchase blank optical discs and a USB optical DVD Writer as there is no built-in
Caution
optical drive in order to burn media.).
■ Click on the [System Backup and Restore*] icon to create backup recovery media and
application discs.
■ Look in the User's Guide (Troubleshooting Your LIFEBOOK) for more detailed instructions.
8. User's Guide
■ Your electronic User's Guide contains important detailed information about your new computer.
You can access your User's Guide by selecting its icon from the traditional Windows desktop.
(You will need to be connected to the Internet.)
for the first Time
®
*Note: For Windows 7, you will be using myRecovery.
*