Parallel Port - Fujitsu LifeBook E752 Bios Manual

L I F E B O O K E / P / S / U B I O S G u i d e
Serial/Parallel Port Configurations Submenu of the Advanced Menu
The Serial/Parallel Port Configurations submenu is for setting the serial and parallel port parameters.
Serial Port:
Base I/O Address/IRQ:

Parallel Port:

Mode:
Base I/O Address:
Interrupt:
DMA Channel:
F1 Help
ESC Exit
Table 6: Fields, Options and Defaults for the Serial/Parallel Port Configurations Submenu of the Advanced
Menu
Menu Field Options
Serial Port: Disabled

Enabled

Auto

Base I/O Address/ 3F8/IRQ4

IRQ 2F8/IRQ3

3E8/IRQ4

2E8/IRQ3

Parallel Port: Disabled

Enabled

Auto

Mode: Output only

Bi-directional

ECP

12
Phoenix SecureCore(tm) Tiano Setup
Advanced
Serial/Parallel Port Configurations
[Enabled]
[3F8/IRQ 4]
[Enabled]
[Bi-directional]
[378]
[IRQ 7]
[DMA 1]
Select Item
Select Menu
Figure 6. Serial/Parallel Port Configurations Submenu
Default
[Enabled]
[3F8/IRQ4]
[Enabled]
[Bi-directional]
Change Values
-/Space
Select Sub-Menu
Enter 
Model Description
E752, S752, When disabled, the serial port is disabled. When
S762 enabled, the serial port is enabled with the user-
selected configuration. When Auto is selected, the
Plug & Play OS configures the port.
E752, S752, Allows you to select the base I/O address and the IRQ
S762 for the port when the Serial Port is enabled.
E752, S752, When disabled, the parallel port is disabled. When
S762 enabled, the parallel port is enabled with the user-
selected configuration. When Auto is selected, the
Plug & Play OS configures the port.
E752, S752, Allows you to select the mode for the parallel port
S762 when the Parallel Port is set to Auto or Enabled.
Item Specific Help
[Disabled]
The port is disabled.
[Enabled]
The port is enabled
with user configuration.
[Auto]
Plug & Play OS
configures the port.
F9 Setup Defaults
F10 Save and Exit