Initial Start-Up; Booting The System; Connect To The Internet Or Network - Fujitsu LifeBook T902 Get Started

Display Panel
DC Power
Jack
AC
Adapter
Power/Suspend/Resume Slide
Wireless Decvice
Switch
Initial Start Up
1. open the Display Panel
■ Ensure that your LIFEBOOK is on a hard level surface and that the air vents are not blocked.
■ Carefully lift the display, and adjust until it is at a comfortable viewing angle.
2. Convert from Notebook to tablet
■ Open your notebook and lift the display so it is perpendicular to the keyboard.
■ Rotate the display 180 degrees (either direction).
■ Carefully fold the display down onto the keyboard.
■ Reverse this procedure to return to the notebook configuration.
■ Be sure to rotate the display in the opposite direction.
3. Connect AC Power
■ Plug the power cord into the AC adapter and plug the AC adapter into your notebook.
■ Connect the power cord to an electrical outlet.

4. Booting the System

■ We strongly recommend that you do not attach any external devices until you have gone
through the initial power on sequence.
■ Slide the Power/Suspend/Resume button.
■ The notebook is now on and the battery is being charged.
■ When you turn on your notebook for the first time, it will display a Fujitsu logo on the screen.
If you do nothing the system will load the operating system, and then the Windows Welcome will begin.
5. Starting Windows
■ After you boot up the system the first time and follow the instructions on the screen, you will
eventually come to the Welcome window. After the Welcome window appears, the screen will
black out for up to several minutes. This is normal. Do Not AttemPt to PoWeR DoWN tHe
SYStem At tHIS PoINt. While the screen is blacked out, your system configuration is being set up
and the necessary files are being installed.
■ During the course of the first start up, you will need to read and accept the End User License
Agreements (EULAs) for Microsoft and Fujitsu.
If you reject the terms of the license agreement you will be asked to review the license agreement for information on
returning Windows or to shut down your LIFEBOOK .
®
You cannot use your LIFEBOOK until you have accepted the license agreement. If you stop the process your TABLET PC will
return to the beginning of the Windows

6. Connect to the Internet or Network

■ Ensure the Wireless Status Indicator is "On," or— Connect an Ethernet cable (not supplied) to the
LAN jack on your notebook and to a wall jack or to Ethernet router (not included).
■ Register your lIfeBook with fujitsu Service and Support via our website
(http://solutions.us.fujitsu.com/www/content/support/). this helps us to better serve you.
7. Activate Additional Utilities, Applications, & Drivers
■ You can launch desktop icon "Fujitsu Bonus Apps" to see if there are any additional applications
available for the system. Bonus Apps contains optional applications. You can select individual or all
software that is available. BonusApps will automatically install for you.
8. Create backup media with myRecovery
■ Click on the [MyRecovery] icon to create backup recovery media and application discs.
■ Look in the User's Guide (Troubleshooting Your LIFEBOOK) for more detailed instructions.
9. User's Guide
■ Your electronic User's Guide contains important detailed information about your new computer. You
can access your User's Guide by selecting its icon from the screen desktop.
(You will need to be connected to the Internet.)
for the first time
®
Welcome Process, even if you shut your LIFEBOOK down and start it up again.
®