Safety Warnings Specific For Polishing Operations - Bosch GP712VS Operating/Safety Instructions Manual

Keep bystanders a safe distance away from
work area. Anyone entering the work area
must wear personal protective equipment.
Hold power tool by insulated gripping
surfaces only, when performing an
operation where the cutting accessory may
contact hidden wiring or its own cord.
Position the cord clear of the spinning
accessory.
Never lay the power tool down until the
accessory has come to a complete stop.
Do not run the power tool while carrying it
at your side.
Regularly clean the power tool's air vents.
Do not operate the power tool near
flammable materials.
Do not use accessories that require liquid
coolants.
Kickback and Related Warnings
Maintain a firm grip on the power tool and
position your body and arm to allow you to
resist kickback forces. Always use auxiliary
handle, if provided, for maximum control
over kickback or torque reaction during
start-up.
Never place your hand near the rotating
accessory.
Do not position your body in the area where
power tool will move if kickback occurs.
Use special care when working corners,
sharp edges etc. Avoid bouncing and
snagging the accessory.
Do not attach a saw chain woodcarving
blade or toothed saw blade.
Safety Warnings Specific for Sanding
Operations:
Do not use excessively oversized sanding
disc paper. Follow manufacturer's
recommendations, when selecting sanding
paper.
Safety Warnings Specific for
Polishing Operations:
Do not allow any loose portion of polishing
bonnet or its attachment string to spin
freely. Tuck away or trim any loose
attachment strings.