Drobo 5N Manual page 34

iSCSI; Drobo Dashboard Application (required for iSCSI): Microsoft® Windows®Operating
Systems, Apple® Macintosh® OS-Xv10.5+;File system support: NTFS, HFS+, FAT32, and
EXT3.
B800fsSpecifications &Systems Requirements – Power Supply: AC Input: 100/240VAC,
1.8/0.75 A, 50/60 Hz; Operating Temperature: 10°C-35°C (50°-95°F); Non-operating (storage): -
10°-60°C(14°-140°F); Operating Humidity: 5% - 80%; Dimensions: 12.17" wide x 5.46"tall x
14.1"long (309mm wide x 138.9mm tall x 357.4mmlong); Weight: 16 lbs 3 ozs.; Storage: Accepts
up to eight 3.5" SATA I or II internal desktop hard drives; Interfaces: Ethernet; Drobo Dashboard
Application (recommended): Microsoft® Windows®Operating Systems XP SP3+, Apple®
Macintosh® OS-X v10.5+;File system support: EXT3.
Drobo 5D Specifications & Systems Requirements – Power Supply: AC Input: 100-
240VAC~2.5A, 50-60Hz; DC Output: 12VDC 12.5A & 150W Max.; Drobo Power Consumption:
1.5A @ 12V (18W); Operating Temperature: 10°C-35°C (50°-95°F); Non-operating (storage): -
10°-60°C (14°-140°F); Operating Humidity: 5% - 80%; Dimensions: 5.9" wide x 7.3" tall x 10.3"
long (150.3mm wide x 185.4mm tall x 262.3mm long); Weight: 8 lbs (without power supply);
Storage: Accepts up to five 3.5" SATA I or II internal desktop hard drives; Interfaces: USB 3.0,
thunderbolt; Drobo Dashboard Application (recommended): Microsoft® Windows® 7 SP1+,
Microsoft® Windows® 8, Apple® Macintosh® OS-X 10.7.x, Apple® Macintosh® OS-X 10.8.x ;
File system support: NTFS, HFS+, FAT32, and EXT3.
Drobo 5N Specifications & Systems Requirements – Power Supply: AC Input: 100-
240VAC~2.5A, 50-60Hz; DC Output: 12VDC 8.33A & 100W Max.; Drobo Power Consumption:
5A @ 12V (60W); Operating Temperature: 10°C-35°C (50°-95°F); Non-operating (storage): -10°-
60°C (14°-140°F); Operating Humidity: 5% - 80%; Dimensions: 5.9" wide x 7.3" tall x 10.3" long
(150.3mm wide x 185.4mm tall x 262.3mm long); Weight: 8 lbs. (without power supply); Storage:
Accepts up to five 3.5" SATA-compliant internal desktop hard drives; Interface: Ethernet; Drobo
Dashboard Application (recommended): Microsoft® Windows® 7 SP1+, Microsoft® Windows® 8,
Apple® Macintosh® OS-X 10.7.x, Apple® Macintosh® OS-X 10.8.x ; File system support:
EXT3.
Drobo Mini Specifications & Systems Requirements – Power Supply: AC Input: 100-
240VAC~2.5A, 50-60Hz; DC Output: 12VDC 4.16A & 50W Max.; Drobo Power Consumption:
1.5A @ 12V (18W); Operating Temperature: 10°C-35°C (50°-95°F); Non-operating (storage): -
10°-60°C (14°-140°F); Operating Humidity: 5% - 80%; Dimensions:7.25" wide x 2" tall x 7" long
(184mm wide x 50.8mm tall x 178mm long); Weight:2.2 lbs (without power supply) ; Storage:
Accepts up to four 2.5" SATA-compliant internal laptop drives; Interfaces: USB 3.0, Thunderbolt;
Drobo Dashboard Application (recommended Microsoft® Windows® 7 SP1+, Microsoft®
Windows® 8, Apple® Macintosh® OS-X 10.7.x, Apple® Macintosh® OS-X 10.8.x; File system
support: NTFS, HFS+, FAT32, and EXT3.
FCC Compliance & Advisory Statement – This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving
antenna. 2) Increase the separation between the equipment and receiver. 3) Connect the equipment into an
Drobo 5N Getting Started Guide 34