System Setup Options - Dell Vostro V13 Service Manual

System Setup Options
Main
The Main tab lists out the primary hardware features of the computer. The table below defines the function of each option.
Main
System Time
System Date
Bios Version
CPU Type
CPU Speed
CPU Cache Size
CPU ID
Product Name
Fixed HDD
HDD Size
System Memory
Extended Memory
Memory speed
AC Adapter Type
Advanced
The Advanced tab allows you to set various boot and DOS-mode functions. The table below defines the function of each option and its default value.
Boot-time Diagnostic Screen
QuickBoot Mode
Intel® SpeedStep™ Technology
No-Execute Mode Memory
Protection
Intel® Virtualization
Technology
Integrated NIC
WLAN Control
WWAN Control
Bluetooth
USB Outside Ports
USB BIOS Legacy Support
USB Wake Support
ExpressCard
Card Reader
Wake On LAN
SATA Mode Selection
Camera Control
Microphone Control
Keyboard Click
Security
The Security tab displays the security status and allows you to manage the security features of the computer.
Resets the time on the computer's internal clock.
Resets the time on the computer's internal calendar.
Display the BIOS revision.
Displays the type of processor.
Displays the speed of the processor.
Displays the processor cache size.
Displays the processor ID.
Displays the computer model name.
Displays the model number of the hard drive.
Displays the size of the hard drive.
Displays the total computer memory.
Displays the total extended memory.
Displays the memory speed.
Displays the type of the AC adapter.
Advanced
Enable or disable the system information from
being displayed on the screen during power-on self
test (POST)
Allows the System Setup to skip certain tests
during POST which decreases the amount of time
needed to boot the computer.
Allows the clock speed of the processor to be
dynamically changed by software while minimizing
power draw and heat dissipation.
Allows increased protection against buffer overflow
attacks.
Allows a platform to run multiple operating systems
and applications in independent partitions, allowing
one computer to function as multiple virtual
computers.
Enable or disable the power supply to the on–
board NIC
Enable or disable the wireless LAN module.
Enable or disable the wireless WAN module.
Enable or disable the Bluetooth module.
Enable or disable the the USB ports.
Enable or disable the legacy support for the USB
controllers
Allow USB devices to wake-up the computer from
standby. This feature is enabled only when the
AC adapter is connected.
Enable or disable the ExpressCard slot.
Enable or disable the Card Reader slot.
Allows the computer to remotely turned on. This
feature is enabled only when the AC adapter is
connected.
Change the SATA controller mode to either ATA or
AHCI.
Enable or disable the Camera.
Enable or disable the Microphone.
Enable or disable the keyboard sound.
Default: Disabled
Default: Enabled
Default: Enabled
Default: Enabled
Default: Disabled
Default: Enabled
Default: Enabled
Default: Enabled
Default: Enabled
Default: Enabled
Default: Enabled
Default: Enabled
Default: Enabled
Default: Enabled
Default: Enabled
Default: AHCI
Default: Enabled
Default: Enabled
Default: Disabled