FEL:
FE Lock
III1III[
. .
__
FE (flash exposure) lock locks the correct flash exposure setting for any
part of the scene.
With
<
ETTL
>
displayed on the LCD panel, you press the camera's
<FEL >
button. If the camera does not have the
<FEL >
button, press the
<*>
button.
Focus the subject.
Press the
<FEL>
button. (816)
Aim the subject at the center of the
viewfinder and press the
<FEL >
button.
The Speed lite will fire a preflash and
the required flash output for the
subject is retained in memory.
"FEL" will be displayed in the
viewfinder for 0.5 sec.
Each time you press the
<FEL>
button, a preflash will be fired and a
new flash exposure setting will be
locked.
o
If the subject is too far away and underexposure will result, the
<
~
>
icon
will blink in the viewfinder. Move closer to the subject and try the FE lock
again.
If
<ETTL>
is not displayed on the LCD panel, FE lock cannot be set.
If the subject is too small, FE lock might not be very effective.
16