Interface Setup - Garmin GPSMAP 60CSx Owner's Manual

M M > d s
AIn enu IsPlAy etuP
To access the Interface Setup Page:
On the Setup Menu Page, highlight the
Interface icon, and press ENTER.
Serial Data Format—sets the data format to one of
the following:
• GARMIN—selects the proprietary format used
to exchange waypoint, route, track log and
MapSource data with a PC.
• NMEA In/NMEA Out—supports input and
output of standard NMEA 0183 version 3.01
data.
• TEXT OUT—allows ASCII text output of
location and velocity information. No input.
• NONE—provides no interfacing capabilities.
If you select NMEA In/NMEA Out or Text Out,
additional fields appear. The baud rate for NMEA
In/NMEA Out is locked at 4800. If selecting Text Out
highlight the Baud Rate field, and press ENTER.
Use the ROCKER key to highlight the desired setting
and press ENTER.
6
- I s
nterfAce etuP
USB Mass Storage—allows the
microSD card to be used as a
USB Mass Storage device. It
also allows transfer of Track
Log Data to Garmin
MapSource.
To activate USB Mass
Storage:
1. Connect the unit to a PC
using the USB cable.
2. Highlight the on-screen USB Mass Storage
button and press ENTER.
3. Observe an illustration of the GPSMAP 60CSx
connected to a computer and an Unplug or Eject
icon shown on a PC's system tray or a storage
device icon for the microSD on a Macintosh
4. Double-click on a PC's My Computer to
observe a new Removable Disk Drive listed. If
drives are networked, see the note below.
If using a Macintosh, double-click on the icon to
view the directory of files on the microSD card.
Note: Like most USB storage devices,
the GPSMAP 60CSx is not compatible with
Windows 95, Windows
®
GPSMAP 60CSx Owner's Manual
.
®
98 or Windows ME.
® ®