Garmin GPSMAP 60CS Owner's Manual page 61

Navigating a Route
After you have created a route, you can begin navigation immediately
or save it to the Saved Routes list as explained on page 49.
When you are navigating a route, a guidance message and graphic
view of turns in the route will display as you approach each one. Using
the "Follow Roads" option from the Routing Setup Page increases the
number of turns and displays an Active Route page with a list of turns. If
you selected the "Off Road" option you can view only the list of points for a
route from the Active Route Page. (See Routing Setup on page 62.)
To Preview the Turns for an Active Route:
1. From the Routes Page, highlight the route from the Routes list.
2. Press ENTER to display the Route Page for the route.
3. Highlight the "Navigate" button and press ENTER to begin
navigation and display the route on the Map Page.
4. To view the list of turns on the route, press the PAGE key to
display the Active Route Page. The view any individual turn on
the list, use the ROCKER key to highlight it and press ENTER.
5. The page displays the turn and guidance text and a small fi eld
at the bottom showing the turn number in sequence and total
turns in the route. To scroll through all turn previews, use the
ROCKER key Up and Down arrows. To exit the preview page,
press the QUIT key.
6. To stop navigating, select "Stop Navigation" from the Map or
Compass Page and press ENTER.
GPSmap 60CS
GPS Navigation
Using Routes
This fi eld changes
to red at the
second warning
beep, when you are
about to reach the
turning point.
Preview of Turn 4 of 9 Turns on a
Route
List of Turns for an Active Route
using the "Follow Roads" option
51