Panasonic TH-47LFX6 Operating Instructions Manual page 53

DIGITAL LINK status
Display the DIGITAL LINK connection environment.
Select "DIGITAL LINK status" and press
LINK status : Either "No link", "DIGITAL LINK", or "Ethernet" will be displayed.
No link
DIGITAL LINK
Ethernet
HDMI status : Either "No HDMI", "HDMI ON", or "HDCP ON" will be displayed.
No HDMI
HDMI ON
HDCP ON
Signal quality : It is the quanti ed minimum and maximum numbers of errors that have occurred. The
display colors are red, yellow, or green, depending on the number.
The number is represented by yellow or red if the LAN cable is disconnected or the cable
is not shielded. This signal quality shows gures between the twisted pair cable transmitter
that is connected and the display.
Signal Quality
-12dB or below
-11 to -8dB
-7dB or above
Digital Interface Box
A switch will be made to the Set up Digital Interface Box menu when "Digital Interface Box" is selected and
pressed.
Note:
This function can only be selected when the Digital Interface Box (ET-YFB100) made by our company is connected
to a LAN terminal and its power is on.
.
: No LAN connection, etc.
: Connected to the DIGITAL LINK device by LAN
: The PC is connected to the DIGITAL LINK terminal of this product and is
LAN connected
: DIGITAL LINK not connected
: DIGITAL LINK connected
: A signal with an HDCP is owing with a DIGITAL LINK connection.
Display Colors
Green
Yellow
Red
Network Setup
DIGITAL LINK status
LINK status
HDMI status
Signal quality
Min
Max
Reception Status
The reception is normal
Part of the received
data is corrupted
There are reception
dif culties
No Link
No HDMI
-XX dB
-YY dB
is
45