Garmin GPSMAP 496 Owner's Manual page 18

G S > U GPSMAP 496
ETTING TARTED SING THE
To enter data in a data field:
1. Use the ROCKER to highlight the data field you want, and
press ENTER to activate the field.
2. Press up or down on the ROCKER to select characters.
Press right to move to the next character or press left to
move back to the previous character. If there are two lines of
data, keep pressing right to drop to the next line.
3. After entering the data, press ENTER.
Entering Data
NOTE: To clear the entire data field, highlight the left-most
character field and press left once more on the ROCKER.
Not all fields are programmable. When you are on a page with fields
that are not selectable, the highlight skips over them.
10
GPSMAP 496 Databases
Your GPSMAP 496 comes with built-in City Navigator street and
points of interest mapping, AOPA Airport Directory, Jeppesen
database, Obstacle database, Terrain database, and Voice Guidance
database. You also should update your Jeppesen database to use the
most current data. Refer to page 170
information.
MapSource Detailed Maps
Optional Garmin data cards and MapSource CD-ROMs enhance the
versatility of your GPSMAP 496. With optional BlueChart g2 data,
you can access marine navaids, wrecks, obstructions, and anchorage
locations.
The included USB Interface Cable or an optional PC Interface Cable
(with a serial connector) is used to transfer MapSource CD-ROM
data to the optional data card.
For compatible MapSource products, refer to the Garmin Web site at
www.garmin.com/cartography/.
®
in the "Appendix" for more
GPSMAP 496 Owner's Manual