Display - Kenmore 580.720059200 Owner's Manual

DISPLAY
"_' REMOTE CONTROL SIGNAL RECEIVER
V TEMP A.
1
MODE ,,_
J
/
TIMER )
FAN
SPEED
-- TEMPERATURE SEI-rlNG
• This button can automatically control the temperature
of the room. The temperature can be set within a range of
60°F to 86°F by increments of I°F.
-- MODE
- Every time you pushthis button, it willshiftamong
COOL, ENERGY SAVER and FAN.
- ENERGY SAVER:
• The fan stops when the compressor stops cooling.
Approximately every 3 minutes the fan will turn on and
check the room air to determine if cooling is needed.
_TIMER
- SHUT-OFF TIME
• If unit is running, T imersets numberof hours untilshut-off.
• Everytime you pushTimer button,it advancesthe Timer
settingas follows: 1 Hour _ 2 Hours _,etc._,12 Hours
maximum.
- START TIME
• If unit is off, Timer sets number of hoursbefore unit starts.
• Every time you push Timer button, it advances the Timer
setting as follows: 1 Hour ,. 2 Hours ,. etc._. 1 2 Hours
maximum.
• To turn the air conditioner ON, push the button. To turn the air
conditioner OFF, push the button again.
• This button takes priority over any other button.
• When you first turn it on, the unit is in cool mode, High fan
speed, Temperature setting at 72°F.
FAN SPEED
• Everytimeyou pushthis button,it advancesthe setting as
follows: {High_,Low _ Med _.High}
-10-