Panasonic TC-LSOE60 Owner's Manual page 7

42"/50"/58"/65" class 1080p lcd hdtv
Table of Contents

Advertisement

Flat panel displays
are not a lways supported
on
the proper stands orinstalled
according
tothe
manufacturer's
recommendations.
Flat panel
displays
that are inappropriately
situated
on
dressers,
bookcases,
shelves,
desks, speakers,
chests, orcarts may f all o ver and may c ause
personal
injury oreven death.
The c onsumer
electronics
industry
(of w hich
Panasonic
isamember)
iscommitted
tomaking
home entertainment
enjoyable
and safe. To prevent
personal
injury ordeath, be sure t ofollow t he
following
safety guidelines:
TUNE INTO S AFETY:
* One s ize d oes N OT f itall.Follow the
manufacturer's
recommendations
for t he safe
installation
and use ofyour flat p anel display.
* Carefully
read a nd understand
all e nclosed
instructions
for p roper use ofthis product.
* Don't allow c hildren
toclimb onorplay w ith
furniture
and television
sets.
* Don't place flat p anel displays
on furniture
that
can easily be used a s steps, such a s achest of
drawers.
* Remember
that children
can become
excited while
watching
aprogram,
especially
on "larger than l ife"
flat p anel displays.
Care s hould be taken toinstall
the display where itcannot bepushed,
pulled over,
orknocked
down.
* Care should be taken toroute all c ords and cables
connected
tothe flat p anel display so that they
cannot bepulled or grabbed
by curious
children.
WALL
MOUNTING:
IF YOU DECIDE
TO WALL
MOUNT
YOUR
FLAT PANEL
DISPLAY, ALWAYS:
* Use a mount that has been recommended
by
the display
manufacturer
and/or listed by an
independent
laboratory
(such as UL, CSA, ETL).
* Follow all instructions
supplied
by the display
and
wall mount
manufacturers.
* If you have any doubts about your ability to safely
install your flat panel display,
contact
your retailer
about professional
installation.
* Make sure the wall where
you are mounting
the
display
is appropriate.
Some wall mounts
are not
designed
to be mounted
to walls with steel studs
or old cinder block construction.
If you are unsure,
contact
a professional
installer.
* A minimum
of two people
are required
for
installation.
Flat panel displays
can be heavy.
Panasonic
recommends
that a qualified
installer
perform
the wall-mount
installation.
See page
8.
The American
Academy
of Pediatrics
discourages
media
viewing
for children
younger
than
two years.
For more
details,
see
www.aap.org.
[] About
built-in
wireless
LAN
@To use the built-in wireless LAN, using an access point is recommended.
¢ To use the built-in wireless LAN in the access point mode, up to 7 devices are connectable.
But the
transfer rate will vary according to communication
environment
or connected equipments.
@ Do not use the built-in wireless LAN to connect to any wireless network (SSID *_) for which you do
not have usage rights. Such networks may be listed as a result of searches.
However, using them
may be regarded as illegal access.
@Check that the Access point supports WPS .2.
(If it does not support WPS, the encryption key of the Access point is required when configuring settings.)
@ Follow the instructions on the Access point setup screen and configure the appropriate security settings.
For more details on setting of Access point, please refer to operating manual for the Access point.
@We recommend using 11n (5 GHz) for the wireless system between the built-in wireless LAN and
Access point.
Communication
is also possible with 11a, 11b, and 11g, but the communication
speed may be
slower.
@ if the wireless system of the Access point is changed, devices that could connect by wireless LAN
may no longer be able to connect.
@ Data transmitted
and received over radio waves may be intercepted and monitored.
@ Keep the TV away from the following devices as much as possible:
Wireless LAN, microwaves,
and other devices that use 2.4 GHz and 5 GHz signals. Otherwise, the
TV failures such as malfunction may occur due to the radio wave interference.
@When noises occur due to the static electricity, etc., the TV might stop operating for the protection
of the devices. In this case, turn the TV Off with power On / Off switch, then turn it On again.
*_ SSID is a name for identifying a particular wireless network for transmission.
,2 WPS: Wi-Fi Protected Setup
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents