Related Manuals for Jensen JIMS-70I
Summary of Contents for Jensen JIMS-70I
- Page 1 ® Docking Digital Clock Radio For iPod and iPhone USER MANUAL JiMS-70i (iPod/iPhone Not Included) PLEASE READ THIS OPERATING MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
-
Page 2: Dear Jensen® Customer
The serial number of this product is found on its bottom cover. You should note the serial number of this unit in the space provided as a permanent record of your purchase to aid in identification in the event of theft of loss. Model Number: JiMS-70i Serial Number:... -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. -
Page 4: Important Notes
IMPORTANT NOTES Avoid installing the unit in locations described below: Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters. Places subject to constant vibration. Dusty, humid or moist places. COMPLIANCE WITH FCC REGULATIONS This device complies with Part 15 of the FCC Rules. -
Page 5: Product Features
PRODUCT FEATURES The JiMS-70i is an iPod/iPhone Docking Music System that incorporates the following features: Play and Charge your iPod nano, iPod touch, iPod classic, iPod video and iPhone. FM digital tuner with 20 presets Auxiliary input jack ... -
Page 6: Getting Started
AL2: Icon lights when Alarm 2 is on. PM: PM time indicator GETTING STARTED This JiMS-70i is designed to operate using the included AC Adaptor. 2 x 1.5V, ‘AAA’ batteries (not included) are also required for the clock, radio preset and alarm memory back up. -
Page 7: Battery Care
(b) Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries. AC Adaptor Operation 1. Insert one end of the AC adaptor into the DC Jack on back of JiMS-70i. 2. Connect the AC plug of the AC adaptor to an AC 120V~ 60Hz power source. Note: Unplug the AC adaptor and disconnect the DC Jack when the JiMS-70i is not in use for a long period of time. -
Page 8: Radio Operations
The iPod internal clock is automatically updated when sync’d with iTunes. We recommend you sync the iPod with iTunes prior to docking to JiMS-70i to make sure you have the current time available. The iPhone receives constant updates from the phone service provider, so the iPhone time will always be current. - Page 9 Antenna and adjust the position of the wire for best station reception. STORING THE RADIO STATION PRESETS The JiMS-70i allows you to store up to 20 FM stations for easy recall at any time. In the FM mode, tune to the radio station you want to store in memory using buttons.
-
Page 10: Alarm Operations
10.) Press the End Call Icon when you have finished answering the call. Music will resume. 11.) Press and hold the Button until your iPhone/iPod turns off. 12.) Press and hold the POWER/FUNCTION Button to turn JiMS-70i off. Note: Adjust the built-in preset EQ of your Apple device to fine tuning the sound ... - Page 11 Press the Power Button to turn the Alarm Off or Press the Snooze Button to activate the Snooze. Press the Power Button again to turn the JiMS-70i on again if you want to listen to the Radio or the iPod/iPhone.
-
Page 12: Turning The Alarm On/Off
1. Use an audio cable (not included) with one 3.5 mm stereo plug on each end of the cable. 2. Plug one end into the Aux-in jack on JiMS-70i and the other end of the cable into the Line-out Jack or Headphone Jack of your external audio device. -
Page 13: Care And Maintenance
(1) If you connected the Line Out Jack of your external device then you only need to adjust the volume control on JiMS-70i. If you connected the Headphone Jack of your external device then you may need to adjust both the volume control of your external device and the volume control of this system to find the most desirable volume setting. -
Page 14: Specifications
AC Adaptor is not plugged into a wall outlet or the Plug the AC adaptor into a wall outlet and The unit does connector is not plugged plug the connector into the supply jack on the not respond (no into the power supply jack unit. - Page 15 Frequency 88 – 108 MHz “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod and iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
- Page 16 any part thereof, except batteries, when it is returned to the SPECTRA Service Department, accompanied by proof of the date of original consumer purchase, such as a duplicate copy of a sales receipt. You must pay all shipping charges required to ship the product to SPECTRA for warranty service. If the product is repaired or replaced under warranty, the return charges will be at SPECTRA’s expense.