Table of Contents
Advertisement
WMA
MWA
G. Video Input
The yellow connector is
used for video input.
H. Left Audio Input
The white connector is
used for the left side audio.
I.
Right Audio Input
The red connector is used
for the right side audio.
J.
3.5 mm (1/8 in) Output Jack
Wired headphones can be
plugged in with a 3.5 mm
(1/8 in) jack.
K. PLAY
Press this button located
below the video display
screen to start playback of
a disc. On DVDs and video
CDs with playback
control (PBC), menu
screens can display
automatically. It might be
necessary to press the
play button again to begin
play. There is a play
position memory feature
for DVD and video CD
only. If the DVD player is
turned off and then turned
back on, the DVD player
resumes playback where
the disc stopped. The play
position memory is erased
if the disc is removed.
L.
STOP
Press once to stop playing
a DVD.
There is a pre-stop feature
for DVD and video CD
only. This feature resumes
playback of the disc where
it was stopped. Press the
stop button once during
disc playback and
displays on the DVD
startup screen. This icon
disappears after a few
seconds. Press the stop
button a second time,
Infotainment System
or eject the disc, to cancel
the pre-stop feature and to
clear the disc position
memory.
M. EJECT
Press to eject a disc from
the DVD slot.
If a disc is ejected from the
player, but not removed, it
will automatically reload
into the player. Another
way to reload a disc that
has been ejected, but not
removed from the DVD
player, is to press the eject
button or the play button.
Infrared Remote Sensor: Located
in the top center of the video display
screen. Do not block the signal from
the remote to the sensor.
Infrared Transmitters: Located in
the top center of the video display
screen. Do not block the signal from
the headphones to the transmitter.
7-39
Advertisement
Chapters
Table of Contents
