Setup; Guide Setup; Cable Box Setup - Motorola DCT6412 User's Reference Manual

Setup

You can activate and customize certain i-Guide features such as the Flip Bar, Lock options, Cable Box settings, Audio settings and
Languages from the Setup Menu.

Guide Setup

Use your remote to select Setup from the Main Menu, then select Guide Setup.
Use the buttons to select from the following Setup options:
Flip Bar Position – The Flip Bar can appear either at the top or bottom of
your screen.
Flip Bar Timeout – Change the amount of time in which the Flip Bar will
stay on your screen from 3 to 15 seconds.
Auto-Tune
• Yes – Automatically tunes to a channel after 2 seconds when you
enter numbers on your remote.
• No – Enter 3 digits or press OK after entering numbers on the remote.
Message – Select On to make the message envelope appear when a new
message is received.
Reminder Notice – Adjust the amount of time in which the Reminder
Notice will appear before the start of a program from 1–15 minutes.
Listing Grid Height – Adjust the listings for single- or dual-height
grid display.

Cable Box Setup

Time Display
• Off - Displays the currently tuned channel on the front
of the cable box.
• On - Displays the current time on the cable box.
AC Outlet
• Switched - Determines that power is available only when the cable box is on.
• Unswitched - Allows the power to remain constant to the outlet on the back of the cable box.
See Configuration – Highlight and press OK to show the configuration screen (includes information your cable
company may need in the event of a problem with your service).
34