Programmable Buttons - Motorola CP185 Series User Manual

Programmable Buttons

The programmable buttons consist of:
• Side Programmable Button 1
• Side Programmable Button 2
• Front Programmable Button 1
• Front Programmable Button 2
• Front Programmable Button 3
The following functions can be assigned as short press i.e.
press and release; or long press i.e. press and hold for more
than 1 second.
Button
Backlight Toggles backlight display between ON and OFF.
Channel Alias Toggles display between Channel Number and
Channel Alias.
Keypad Lock Locks or unlocks all buttons except PTT, Side
Programmable Button 1, Side Programmable
Button 2, Channel Selector Knob and ON/OFF/
Volume Knob. Applicable for Long Press Only.
Function
Button
Monitor Monitors the channel for any activity as long as
the button is pressed.
Nuisance Removes unwanted channel(s) temporarily from
Channel Delete scan list during Scan. Applicable for Long Press
Only.
TPL/DPL Enables or disables radio from requiring
Enable matching TPL/DPL to unsquelch.
Power Level Selects required power level: High or Low.
Reverse Burst Select the Reverse Burst Type: None, 180 or
240.
Channel Scan Starts or stops Channel Scan.
Scrambling Toggles between the two scrambling codes
Code Select available.
Scrambling Enables or disables scrambling feature for the
Enable/Disable selected channel. Applicable for Long Press
Only.
Squelch Level Selects desired squelch level: Normal or Tight.
Sticky Monitor Toggles the permanent monitor function until the
button is pressed again. Applicable for Long
Press Only.
Talkaround/ Enables toggle between repeater and
Repeater Mode talkaround mode operations.
Unassigned No function is programmed to this button.
Function
5
English
English