Table of Contents
Advertisement
Installation
Installation
Open the door. Through each of the
two holes in the front rim, left and
right, screw the machine to the front
edge of the continuous worktop.
Do not use silicone sealant to seal
the gaps between the machine and
any neighbouring units as this would
hinder ventilation to the circulation
pump.
36
Depending on the various requirements
for building under, the following kit may
also be required:
Cover plate (worktop protection)
The underside of the work surface is
protected from steam damage by a
plate of stainless steel.
Hide quick links:
Advertisement
Table of Contents
