Using The Dishwasher - GE EDW4000 Owner's Manual

About the dishwasher control panel
D Start
Close tile dishwasher door and select tile
c\cle and desired enhancements. Touch tile
START/RESETpadto begin tile cycle. Water fill
begins, and approxinmtely 60 seconds later tile
wash action begins.
NOTE: Tile dishwasher remembers wmr last cycle so
you don't have to reprogram each "time. _A]len tile
(tishwasher door is fully closed, tile control panel
lights will display tile last settings you selected.
If you don't _mt to change ally of tile settings, simply
touch tile
START/RESETpad
to begin tile cycle.
If the door is closed tile indicator lights will turn
off if the
START/RESET
pad is not selected within
t\_o minutes. To activate tile displa}, open and
close tile door or press any pad.
Nso, if a power thilure occurs, NORMAL and HEATED
DRYwill automaticall) be progranm-led. Make am
new selections and touch die START/RESETpadto
begin tile cycle.
El Clean
Tile CLEAN
light is illuminated x_hen a _ash e_cle
is complete. Tile light will stay ON until tile door
is opened.
Flashingdisplaylights.
Status Indicator Lights
START/RESET
What It Means
(Xcle has been interrupted by pressing tile START/RESETpad.I,ight will quit
tl)_shing after tile dishwasher automatically drains out tile x_ater.
Using the dishwasher.
Check the Water Temperature
Tile entering water should be at least 120°F and not
mol_ than 150°E fbr eftecti_e cleaning and to pl_\'ent
dish damage. Check the water temperature with a
can& or meat flmnnometec Turn on tile hot wamr
faucet nearest tile dishwasher, place the thermometer
ill a glass and let the water run continttouslx into the
glass until tile temperature stops rising.
UseJet-Dry®or CascadeRinseAid®RinseAgent
det-Drl_ or Cascade Rinse AigY rinse agent i'eillOX es spots aild
pre'_eilts ilew
lihll buildup Oil VOtli"
dishes, glasses, flatware, cookware and plastic.
Riling the Dispenser
Tile rinse agent dispenser holds 3.5 oz. ot rinse agent./Jnder normal
conditions, this will last approximatel,_ one month. Tr_ to kee I) it fllll,
but do not merrill.
[_] Make sure tile dishwasher door is flllly open.
['_-'] Turn tile dispenser knob to tile leli and lift it out.
Fj] Add rinse agent until tile indicator window looks fllll.
[_] Clean up any spilled rinse agent with a damp cloth.
N Replace tile dispenser knob.
window Dispenser cap
Rinse Aid Setting
Tile amount of rinse agent released into tile final wash can be
adjusted. Tile factory setting is at tile midpoint. If' there are rings
of calcium (hard water) spots on dishes, try a higher setting.
To adjust the setting
Remo'_e tile dispenser knob, then turn tile a(!juster counterclockwise
to iilerease tile aiilO//ilt of riiise ageilt.
agent
6 adjuster