Floor fixing option
4
Bracket
Drill 3/8" (10 mm) fixing holes at the marked locations on the floor and insert
the anchor. Install the washer and insert the hexagon screw into the bracket
then tighten the screw. Position the toilet in the installed position. Install the
sleeves, tighten the screw and attach the caps.
Anchor
5
Screw
Drill 5/16" (8 mm) mounting holes at the marked locations. Insert anchors into
the holes. Place the toilet and align with anchoring holes position. Tighten screws
and attach the bolt caps.
1102602-A2-D
Hexagon
Lag Screw
Bracket
Fixing Holes
Washer
Anchor
Screw Cap
Screw
Anchor
Drill
Sleeve
4
Hole
Cap
Sleeve
Screw
Kohler Co.