Table of Contents
Advertisement
MAKING
CONNECTIONS
21
Connecting
a
PC
,_.-@ NOTE
* it is recommended
to use an HDMi connection for the best image quality.
* in PC mode, there may be noise associated with the resolution,
vertical pattern, contrast or brightness,
if noise
is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the
brightness and contrast on the PICTURE menu until the picture is clear.
* The synchronization
input form for Horizontal and Vertical frequencies
is separate.
* Depending on the graphics card, some resolution
settings may not allow the image to be positioned on the screen
properly.
_-@
NOTE
* if you want to use HDMI-PC mode, you must set the input labet to PC mode.
* The OSD (On Screen Disptay) is displayed on the screen as shown below.
- When turning the product on in HDMI input.
- When switching to HDMI input.
* If you select "Yes" the size and image quality are optimised for your PC.
* If you select "No" the size and image quality are optimised
for the AV device (DVD player, set-top box, gaming
device).
* If you select "Do not show message again" this message does not appear until the TV is reset. You can change
the set value in SETTINGS s INPUT s input Label.
HDMI Connection,
DVI to HDMI Connection
or RGB Connection
Choose method A, B or C to make connection.
If you want
to use HDMI-PC
mode,
jou must
set the input
label
to PC or DVl
mode.
(*Not Provided)
PC
HDMI
Advertisement
Table of Contents
