Page 1
_ ii _i i Life's Good r',w N E t_,_ S MA*" UAL " LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. 55LA8600...
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. Read these instructions. Keep these instructions. WARNING/CAUTION Heed all warnings. Follow all instructions. Do not use this apparatus near water. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK).
Page 3
IMPORTANT SAFETY INSTRUCTIONS Protect the power cord from being walked on CAUTION concerning the Power Cord or pinched particularly at plugs, convenience (Can differ by country): receptacles, and the point where they exit from the It is recommended that appliances be placed upon a dedicated circuit;...
Page 4
Do not attempt to modify this product in any way the TV, unplug the power cord and contact an without written authorization from LG Electronics. authorized service center. Unauthorized modification could void the user's Keep the product away from direct sunlight.
Page 5
IMPORTANT SAFETY INSTRUCTIONS Dot Defect For USA and Canada The Plasma or LCD panet is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you're viewing the TV. Those dots are deactivated pixets and do not affect the This equipment has been tested and found to...
Do not sit closer to the TV than the content. recommended distance. Only use LG 3D glasses. Otherwise, you may not Do not watch 3D content when you feel fatigue be abte to view 3D videos properly. from lack of sleep, overwork or intoxication.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon emait request to 'opensource@lge.com'.
TABLE OF CONTENTS TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS MAGIC REMOTE CONTROL FUNCTIONS Viewing 3D Imaging Registering Magic Remote Control LICENSES How to use Magic Remote Control Precautions to Take when Using the Magic Remote Control OPEN SOURCE SOFTWARE NOTICE WATCHING TABLE OF CONTENTS...
INSTALLATION PROCEDURE ASSEMBLING PREPARING INSTALLATION PROCEDURE Open the package and make sure all the accessories are included. Attach the stand to the TV set. Connect an external device to the TV set. Make sure the network connection is available. You can use the TV network functions only when the network connection is made.
Page 10
ASSEMBLING PREPARING Owner's Manual Power Cord Magic Remote Control, Batteries (AA) (See p. 30) Cinema 3D Glasses Stand Screws Stand Base 4EA, M4x 16 The number of 3D glasses may (See p. 14) differ depending on the model (See p. 14) or country.
These devices only work with certain models. The model name or design may be changed manufacturer's circumstances or policies. AN-MR400 AG-F*** AG-F***DP Magic Remote Cinema 3D Glasses Dual Play Glasses AN-BL*** LG Audio device Tag On Wireless IR Blaster (Depending on model)
ASSEMBLING PREPARING Parts Buttons Video call camera _Screen Bu#ons Speakers control Intellgent sensors, 1 Logo light Button DesCription (A/V) Scrolls through the saved channels. / m) Adjusts the volume level. (OK®) Selects the highlighted menu option or confirms an input. (SETTINGS) Accesses the main menus, or saves your input and exits the menus.
ASSEMBLING PREPARING Lifting moving theTV * When transporting a large TV, there should be at least 2 peopte. * When transporting the TV by hand, hold the TV as When moving or lifting the TV, read the following shown in the following illustration.
ASSEMBLING PREPARING Setting up theTV You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment center or other furniture. Affaching sfand If you are not mounting the TV to a wall, use the following instructions to attach the stand.
ASSEMBLING PREPARING Mounting a table Swivel 8 degrees to the left oF right and adjust the angle Lift and tilt the TV into its upright position on a table. of the TV to suit your view. -Leave a 10 cm (4 inch)(minimum)space from the wall for proper ventilation.
ASSEMBLING PREPARING Tidying cables (Depending on model) Gather and bind the cables with the cable holder on the back of theTV. Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. Cable Holder - If there are bolts inserted at the eye-bolts position, Gather and bind the cables with the cable remove the bolts first.
Wall mount bracket (optional) LSW430B An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV.
ASSEMBLING PREPARING You can adjust the angle of the camera with the Using Built-in Camera angle adjustment lever on the back of the built-in camera (within 5 degrees vertically). You can make a Skype video call or use the motion recognition function using the built-in camera of the TV.
ASSEMBLING PREPARING Checking the Camera's Shooting Range Press the SMART button on the remote controt to display the More menu. Select Settings from the More menu and then press the wheel (OK) button. Go to OPTION _ Camera Setting Help and press the wheel (OK) button.
MAKING CONNECTIONS MAKING CONNECTIONS You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device's connection, refer to the manual provided with each device. ----@ NOTE * If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the...
MAKING CONNECTIONS Connecting to a receiver, Player or VCR Connect a HD receiver, DVD Player, or VCR to the TV and select an appropriate input mode. HDMI Connection HDMI is the best way to connect a device. Transmits digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMi cable as shown in the following illustration.
MAKING CONNECTIONS DVI to HDMI Connection Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable. Ir@NOTE •...
MAKING CONNECTIONS Connecting to a mobile phone Mobile High-definition Link (MHL) is an interface for transmitting digital audio/visual signals from mobile phones to television sets. NOTE Connect the mobile phone to the HDMI IN 4 (MHL) port to view the phone screen on the TV. This only works with an MHL-enabled phone.
MAKING CONNECTIONS Component Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cabte as shown in the following illustration. i..:@.o:: If cables are installed incorrectly, it could cause the image to display in black and white or with distorted color. Check to ensure the cables are matched with the corresponding color connection.
MAKING CONNECTIONS Composite Connection Transmits analog video and audio signals from an external device to the TV, Connect the external device and the TV with the composite cable as shown in the following illustration. If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV.
MAKING CONNECTIONS Connecting NOTE * It is recommended to use an HDMI connection for the best image quality. * Depending on the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use. * In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear.
Page 27
MAKING CONNECTIONS Choose HDMI input port connect. it does matter which port use. (*Not Provided) (*Not Provided) DVI OUT...
MAKING CONNECTIONS Connecting to an Audio System You can use an optional external audio system instead of the built-in speaker. Digital Optical Audio Connection Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown in the following illustration.
MAKING CONNECTIONS Connecting Headphones Listening to sound with headphones NOTE AUDIO menu options are disabled when using headphones. When changing AV MODE with headphones connected, the change is applied to video but not to audio. Optical Digital Audio Out is not available when headphones are connected.
Page 30
MAGIC REMOTE CONTROL FUNCTIONS MAGIC REMOTE CONTROL FUNCTIONS When the message "Magic remote control battery is low. Change the battery." is displayed, replace the battery. To install batteries, open the battery cover, replace batteries (1.5 V AA) matching _ and _-:)ends to the label inside the compartment, and close the battery cover.
MAGIC REMOTE CONTROL FUNCTIONS 31 Registering Magic Remote Control The Magic Remote Control operates by pairing with your Please register the remote as follows. automatically: turn the TV On and press the @ Wheel (OK). When registration is completed { the Completio n message appears on the screen.
WATCHING WATCHING Setting complete Confirms the setting options. Experience Magic Remote Control Turning TV on for first time Simple guide of Magic Remote Control (Depending on model) When you turn the TV on for the first time, the Initial NOTE setting screen appears.
Less tnan 80 % condition -20 °C - 60 °C -4 oc 140 oc_ [ Storage Tern 9erature Less tnan 85 % Storage Humiditv 55LA8600 MODELS (55LA8600-UC) 1,229 x 788 x 316 (mm) With stand 48.3 x 31.0 x 12.4 (inch) Dimensions (W x H x D) 1,229 x 721 x 35.1 (mm)
Page 35
SPECIFICATIONS HoriZontai_ ....HoriZ0nta_ - Vertical Frequency vertical Frequency Resolution Frequency (kHZ) (HZ) Resolution Frequency (kHz) (Hz) 640 x 480 31.469 59.94 31.469 59.94 720 x 480 31.50 60.00 800 x 600 37.879 60.31 44.96 59.94 1024 x 768 48.363 60.00 1280 x 720 45.00...
Page 36
36 SPECIFICATIONS Video, which is input as below media contents is switched into the 3D screen automatically. Her Zonta vertical Input Signal FreqUency (kHZ) Frequency (Hz) 54,00 F/P, L/A 67,50 l osop 27,00 S/S, T&B, S/S Full 33,75 67,50 S/S, T&B 67,50 HDMI F/P, F/A...
2D to 3D 320 x 240 (Under) 1024 x 768p 1280 x 720p 2D to 3D, S/S, T&B Miracast_M/ WiDi 1920 x 1080p Others 2D to 3D EXTERNAL CONTROL DEVICE SETUP To obtain the external control device setup information, please visit 'www.lg.com'.
MAINTENANCE/TROUBLESHOOTING MAINTENANCE Cleaning Your Clean your TV regularly to keep it at peak performance and to extend the product lifespan. CAUTION Before Cleaning, turn the power off and disconnect the power cord and allother cables. • When the TV is leftunattended or unused for a long time, disconnect the power cord from the wall outletto prevent possible damage from lightningor power surges.
Page 39
Congratulations on your purchase! As you enjoy your product, please keep these safety tips in mind: THE ISSUE * The home theater entertainment experience is a growing trend larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper stands...
Page 40
_r enls vis}l www3g_com ol caJJ_ 1-800-243-0000 ConsuFrel Usel 1-888-865-3026 USA CoFrFr_rci_l U_. 1-888-542-2623 CANADA www.lg.com The model and seral number of theTV slocated on t e back and o e sde of the TV. This product qualifies...
Page 41
Life's Good i_,il _%_ _ _C¸_'+_¸ R _ • " EXTERNAL CONT DEVICE S£ Please read this manual carefully before operating the set and retain it for future reference, www.lg.corn...
Page 42
KEY CODES KEY CODES This feature is not available for all models. Code Function NOte Code Function Note (Hexa) (He×a) Q.Menu R!C Button CH +, PR + R!C Button CH -, PR - R/C Button List, - (ATSC Only) R/C Button Volume + R!C Button List...
Page 43
(TV) (PC) LGTV supports PL2303 chip-based (Vendor ID " 0x0557, Product ID " 0x2008) USB to serial converter which is not made nor provided by LG. It can be purchased from computer stores that carry accessories for IT support professionals.
Page 44
EXTERNAL CONTROL DEVICE SETUP RS-232C with RS-232C Cable (Legacy) Phone jack Type , You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and the TV, which is specified in the manual. * For other models, connect to the USB port. (TV) (PC) This connection can only be used for the following models: 55/47/39LN5450-UA,...
Page 45
EXTERNALCONTROLDEVICESETUP Communication Parameters Baud rate : 9600 bps (UART) Stop bit : 1 bit Communication code : ASCII code Data length : 8 bits Parity : None , Use a crossed (reverse) cable. Command reference list DATA , ;OMMAND1 OMMAND2 ( exaa cm "H -'ei...
Page 46
EXTERNAL CONTROL DEVICE S ETUP Transmission / Receiving Protocol [Commandl][Command2][ ][Set ID][ ][Data][Cr] [Command 1] First command to control the TV. (j, k, m or x) Second command to control the TV. [Command 2] [Set ID] You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
Page 47
EXTERNALCONTROLDEVICESETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) * In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute _- To control Power Off of the set. on, TV will not display OSD.
Page 48
EXTERNAL CONTROL DEVICE SETUP 09. Tint (Command: k j) 14. Color(Colour) Temperature (Command: x u) _- To adjust the screen tint. _- To adjust colour temperature. You can also adjust You can also adjust tint in the PICTURE menu. Color(Colour) Temperature in the PICTURE menu.
Page 49
EXTERNALCONTROLDEVICESETUP * Digital Terrestrial/Cable/Satellite Data 05: Input Source (Analogue) - 00 : Terrestrial TV (ATV) [Data 00][Data 01]: Channel Data - 01 : Cable TV (CATV) Data 00 : High Channel data * Digital Terrestrial/Cable Data 01 : Low Channel data - 00 00 ~ 27 OF (Decimal: 0 ~ 9999)
Page 50
EXTERNAL CONTROL DEVICE SETUP 20. Control Back Light (Command: m g) [Data Ol][Data 02]: Major Channel Number Data 01: High byte Channel Data For LCD TV / LED TV Data 02: Low byte Channel Data _- To control the back light. - 00 01 ~ 27 OF (Decimal: 1 ~ 9999) [Data 03][Data...
Page 51
EXTERNAL CONTROL DEVICE SETUP 22.3D(Command: x t) (only 3D models) 23. Extended 3D(Command: x v) (only 3D models) (Depending on model) (Depending on model) _- To change 3D option for TV. _- To change 3D mode for TV. [Data 00] 3D option Data Structure 00 : 3D Picture Correction [Data00]...