Rear Brake Light Switch; Checking The Front And Rear Brake Pads - Yamaha FJR13AX(C) Owner's Manual

Rear brake light switch

The rear brake light switch, which is ac-
tivated by the brake pedal, is properly
adjusted when the brake light comes
on just before braking takes effect. If
necessary, have a Yamaha dealer ad-
just the brake light switch.
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU36501
Checking the front and rear
brake pads
The front and rear brake pads must be
checked for wear at the intervals spec-
ified in the periodic maintenance and
lubrication chart.
Front brake pads
1. Brake pad wear indicator groove
The front brake calipers are equipped
with two sets of brake pads.
Each front brake pad is provided with a
wear indicator groove, which allows
you to check the brake pad wear with-
out having to disassemble the brake.
To check a brake pad for wear, check
its wear indicator groove. If a brake pad
has worn to the point that the wear indi-
EAU22390 cator groove has almost disappeared,
have a Yamaha dealer replace the
brake pads as a set.
Rear brake pads
EAU43431
1. Lining thickness
Check each rear brake pad for damage
and measure the lining thickness. If a
brake pad is damaged or if the lining
thickness is less than 0.8 mm (0.03 in),
have a Yamaha dealer replace the
brake pads as a set.
6-25
EAU22500
6