Operation And Important Riding Points; Starting And Warming Up A Cold Engine - Yamaha Zuma YW50X Owner's Manual

Starting and warming up a cold engine<IXE>

OPERATION AND IMPORTANT RIDING POINTS

OPERATION AND IMPORTANT RIDING POINTS
w
● ● ● ● ●
Become thoroughly familiar with
all operating controls and their
1
functions before riding. Consult
a Yamaha dealer regarding any
2
control or function that you do
not thoroughly understand.
3
● ● ● ● ●
Never start the engine or oper-
ate it in a closed area for any
length of time. Exhaust fumes
4
are poisonous, and inhaling
them can cause loss of con-
5
sciousness and death within a
short time. Always make sure
6
that there is adequate ventila-
tion.
● ● ● ● ●
For safety, always start the en-
7
gine with the centerstand down.
8
9
EAU15980
EWA10870
Starting and warming up a
cold engine
cC
See page 5-4 for engine break-in in-
structions prior to operating the ve-
hicle for the first time.
ENGINE STOP
ZAUM00**
1. Engine stop switch "#/$"
1. Set the engine stop switch to "#".
2. Turn the key to "*", and when the
2-stroke engine oil level warning
light comes on, turn the key to
"ON".
EAU16582
cC
If the 2-stroke engine oil level warn-
ECA10250
ing light does not come on, have a
Yamaha dealer check the electrical
circuit.
3. Close the throttle completely.
1
ZAUM00**
1. Kickstarter lever
4. Start the engine by pushing the
NOTE:
If the engine fails to start by pushing
the start switch, release the switch, wait
a few seconds, and then try again. Each
5-1
start switch or by pushing the
kickstarter lever down, while apply-
ing the front or rear brake.
EAU15942
ECA11580
1