Canon Speedlite 58OEX Instruction Manual page 42

Wireless Manual Flash with Varied Flash Output
With manual flash and multiple Speedlites, you can set a different flash output
for each slave unit (group).
All settings are done with the master unit.
1m
Zoom
C''-:mm
M
Press the
<MODE>
button so that
<
M > is displayed.
M
M
Press the
<ZOOM/~>
button so
that <liMitell> blinks.
Select the flash ratio.
{;~
Turn the <@> dial to select <A: B> or
<A: B: C>, then press the <@> button.
.... : >m
C'L: mm
OFF~S
' / , _
MAST I
I
-
r06l~ "'A~"'C
~z
1
~-~.
~-----=='-I--
42
Set the flash output.
r:ill;
Press the
<~>
button.
The slave ID <
A
>
will blink.
Turn the <@> dial to set the flash output
for < A >, then press the <@> button.
The slave 10 < B > will blink. Turn the <@>
dial to set the flash output for < B >, then
press the <0> button.
iw
The slave 10 < C > will blink. Turn the <@>
dial to set the flash output for < C
>,
then
press the <@> button.
9'
All the slave IDs will light.