Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Westinghouse EW32S5UW
Summary of Contents for Westinghouse EW32S5UW
-
Page 3: Table Of Contents
TABLE OF CONTENTS TABLE OF CONTENTS TABLE OF CONTENTS..............i DIGITAL TELEVISION TRANSITION NOTICE ......1 ENERGY STAR DISCLAIMER ............. 1 IMPORTANT INFORMATION............2 Warnings .................. 2 NOTICES ................. 3 FCC COMPLIANCE STATEMENT .......... 4 IMPORTANT SAFETY INSTRUCTIONS ......... 5 Circuit Overload................ - Page 4 TABLE OF CONTENTS POWER CONNECTION ............. 20 CONNECTING AC POWER........... 20 INITIAL SETUP ..............20 CABLE OR SATELLITE BOX CONNECTION SETUP ..21 OTHER INPUT SOURCE CONNECTION SETUP ....23 ANTENNA OR COACIAL CABLE INPUT CONNECTION SETUP SETUP ..............25 BASIC OPERATIONS..............
-
Page 5: Digital Television Transition Notice
DIGITAL TELEVISION TRANSITION NOTICE DIGITAL TELEVISION TRANSITION NOTICE This device contains a digital television tuner, so it should receive digital over the air TV programming, with a suitable antenna, after the end of full-power analog TV broadcasting in the United States on June 12, 2009. The nationwide switch to digital television broadcasting will be complete on June 12, 2009, but your local television stations may switch sooner. -
Page 6: Important Information
IMPORTANT INFORMATION IMPORTANT INFORMATION Warnings To reduce the risk of fire or electric shock: • Do not expose this product to rain or moisture. • Do not remove the rear cover. There are no user-serviceable parts inside. Refer all servicing requirements to qualified service personnel. •... -
Page 7: Notices
IMPORTANT INFORMATION NOTICES Important Notices Concerning Power Cord Selection The specific power cord for this LED TV is enclosed and has been selected according to the country of destination. Use the enclosed power cord to prevent electric shock. Observe the following guidelines if it is necessary to replace the original cord set, or if there is no cord set enclosed. -
Page 8: Fcc Compliance Statement
IMPORTANT INFORMATION FCC COMPLIANCE STATEMENT This equipment has been tested and complies with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and may cause harmful interference to radio communications if not installed and used in accordance with the instructions. -
Page 9: Important Safety Instructions
IMPORTANT INFORMATION IMPORTANT SAFETY INSTRUCTIONS Make sure to note and follow all warnings and instructions marked on the LED TV. Observe the following safety instructions. • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. •... -
Page 10: Circuit Overload
IMPORTANT INFORMATION Circuit Overload Do not overload wall outlets, extension cords, or power strips. This can result in a fire or electronic shock. Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. -
Page 11: Warnings And Precautions
IMPORTANT INFORMATION WARNINGS AND PRECAUTIONS • Do not orient the LED TV towards direct sunlight to reduce glare. • If the LED TV will not be used for a long period of time, unplug the unit and remove the batteries from the remote control. •... -
Page 12: Antenna Installation Safety
IMPORTANT INFORMATION ANTENNA INSTALLATION SAFETY Outdoor Antenna Grounding If an outside antenna or cable system is connected to the LED TV, be sure the antenna or cable system is grounded to prevent voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANS/NFPA 70, provides information on proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. -
Page 13: Cleaning The Led Tv
IMPORTANT INFORMATION CLEANING THE LED TV • Make sure the LED TV is turned off and the power cord is disconnected from the power outlet. • Never spray or pour any liquid directly onto the screen or the case. To clean the screen: 1 Wipe the screen with a clean, soft, lint-free cloth. -
Page 14: Package Contents
PACKAGE CONTENTS PACKAGE CONTENTS 32” LED TV Unit Remote Control (with 2x AAA batteries) LED TV Base User Manual Power Cord Warranty Card AC Adapter Warranty Brochure Screws for Base M4x18 *2pcs Cover neck... -
Page 15: Control Panel
CONTROL PANEL CONTROL PANEL DC IN TUNER AUDIO IN VIDEO Item Description 1. MENU Displays the LED TV setup screen. 2. Volume +/- • Adjusts the volume during playback. • Selects an item on a menu screen. 3. Channel +/- •... -
Page 16: Terminals
TERMINALS TERMINALS DC IN TUNER AUDIO IN VIDEO DC IN TUNER AUDIO IN VIDEO Item Function 1. DC in Connects the AC to DC adapter from this outlet to a power source. 2. Audio in Connects to the audio out port of a computer. 3. -
Page 17: Remote Control
REMOTE CONTROL REMOTE CONTROL Item Description Mutes the sound. Press again to toggle the 1. Mute sound back on. Toggles the TV power on or off. 2. Power 3. Channel keys Use to key in the channel number. 4. Enter ENT Executes a channel entry. -
Page 18: Remote Control Operation
REMOTE CONTROL OPERATION REMOTE CONTROL OPERATION INSTALLING THE REMOTE CONTROL BATTERIES CAUTIONS: • Only use AAA batteries. • Do not mix new and old batteries. This may result in cracking or leakage, which may pose a fire risk or lead to personal injury. •... -
Page 19: Led Tv Base
LED TV BASE LED TV BASE CAUTION: The LED TV unit may be too heavy for one person to lift. If this is the case, make sure to ask for assistance in handling the LED TV to prevent physical injury and/or damage to the unit. INSTALLING THE LED TV BASE 1 Open the LED TV carton box. -
Page 20: Removing The Led Tv Base
REMOVING THE LED TV BASE REMOVING THE LED TV BASE If you intend to repack the LED TV unit (for shipping or storage) or you want to change the installation to a wall mount option, you must first remove the LED TV base. -
Page 21: Antenna Connection
ANTENNA CONNECTION ANTENNA CONNECTION OUTDOOR ANTENNA CONNECTION Cable TV lead in VHF, UHF or VHF/UHF combination antenna 75 ohm coaxial cable (round) RF IN 300-75 ohm ADAPTER 300 ohm twin-lead (flat) (Not supplied) Separate VHF/UHF Antenna VHF Antenna UHF Antenna Home Antenna terminal (75 ohm) 300 ohm twin-lead... -
Page 22: External Device Connections
EXTERNAL DEVICE CONNECTIONS • A position on the RF switch (not supplied) – You can view all unscrambled channels by using the TV's channel keys. • B position on the RF switch (not supplied) – You can view the scrambled channels via the converter/descrambler by using the converter's channel keys. - Page 23 EXTERNAL DEVICE CONNECTIONS The following diagram shows the external device connections. Audio amplifier AUDIO OUT 3.5 mm stereo mini jack cable Audio cable RGB cable SPDIF cable DC IN TUNER AUDIO IN VIDEO Antenna cable / AC to DC Cable TV line adapter Composite AV cable...
-
Page 24: Power Connection
POWER CONNECTION POWER CONNECTION CONNECTING AC POWER IMPORTANT: The LED TV is designed to be powered via an AC adapter. Use ONLY the AC adapter included in the package. Turn off all connected devices before plugging the AC adapter into the power outlet. Connect the power cord of the AC adapter to the LED TV then to a proper AC outlet. -
Page 25: Cable Or Satellite Box Connection Setup
POWER CONNECTION CABLE OR SATELLITE BOX CONNECTION SETUP Select Language Use the up and down arrows on your HDTV control panel or remote control to select the language to be used for menus and messages. Press SELECT to continue. Time Zone Use the up and down arrows on your HDTV control panel or remote control to select your local time zone. - Page 26 POWER CONNECTION Cable/Satellite Box Input Use the up and down arrows on your HDTV control panel or remote control to select the input connected to the set top box. Press SELECT to continue. Press Go Back to return to the previous screen. RF Warning Use the up and down arrows on your HDTV control panel or remote control to select.
-
Page 27: Other Input Source Connection Setup
POWER CONNECTION OTHER INPUT SOURCE CONNECTION SETUP Select Language Use the up and down arrows on your HDTV control panel or remote control to select the language to be used for menus and messages. Press SELECT to continue. Time Zone Use the up and down arrows on your HDTV control panel or remote control to select your local time zone. - Page 28 POWER CONNECTION Select Input Source Use the up and down arrows on your HDTV control panel or remote control to select the input source. Press SELECT to continue. Press Go Back to return to the previous screen.
-
Page 29: Antenna Or Coacial Cable Input Connection Setup Setup
POWER CONNECTION ANTENNA OR COACIAL CABLE INPUT CONNECTION SETUP SETUP Select Language Use the up and down arrows on your HDTV control panel or remote control to select the language to be used for menus and messages. Press SELECT to continue. Time Zone Use the up and down arrows on your HDTV control panel or remote control to select your... - Page 30 POWER CONNECTION Select Channel Scan Type Use the up and down arrows on your HDTV control panel or remote control to select the channel scan type. Press SELECT to continue. Press Go Back to return to the previous screen. Channel Scan in progress The channel scan may take a while to complete.
-
Page 31: Basic Operations
BASIC OPERATIONS BASIC OPERATIONS TURNING THE POWER ON AND OFF Turning on the power Press on the control panel or on the remote control to turn on the LED TV. Turning off the power Press on the control panel or on the remote control to turn off the LED TV. The LED behavior will depend on the enabled Power settings. -
Page 32: Changing Channels
BASIC OPERATIONS CHANGING CHANNELS Follow the instructions below to change channels. Using the Ch Buttons Browse channels To browse through the available channels, press Ch the remote control or on the control panel. Using the Channel Keys Selecting channel To change to a certain channel, key in the channel number using the channel keys and press ENT. -
Page 33: Adjusting The Display Format
BASIC OPERATIONS Using the Input Key Select source using Input Key 1 Press Input. 2 A list of supported video sources is displayed. 3 Press to select the preferred source. 4 Press to switch to the selected input source. ADJUSTING THE DISPLAY FORMAT The input source can sometimes affect the way images are displayed on-screen. -
Page 34: Setup Menus
SETUP MENUS SETUP MENUS SETUP MENU OPERATION Use the setup menus to configure the various operational settings of the LED TV. Displaying the setup menu screen Press on the remote control or MENU on the control panel to display the setup menu screen. -
Page 35: Picture
SETUP MENUS PICTURE Use the Picture sub-menus to configure the display quality. Press on the remote control or MENU on the control panel to display the setup menu screen then select Picture to display the Picture sub-menu. The following options are available: Picture Settings, Screen Size, VGA Settings, Color temperature, Advanced Picture Settings. -
Page 36: Picture Mode
SETUP MENUS Picture mode Use this sub-menu to select one of four preset view options optimized for different viewing conditions. The following options are available: • Standard: Select for standard picture. • Movie: Select for a finely detailed picture. • User: Select for standard picture. - Page 37 SETUP MENUS Color Use Color to adjust the color intensity. Adjusting Color 1 Use the keys to select Color and press 2 Press the keys on the remote control to adjust the Color level. 3 Press to save and exit the screen. Tint Use Hue to adjust the balance of the red, green, and blue colors in the display.
-
Page 38: Screen Size
SETUP MENUS 2 Press the keys on the remote control to adjust the sharpness level. 3 Press to save and exit the screen. Screen Size Press to selet the display aspect ratio till the picture is fit onto the screen. The options are different according to different input source. -
Page 39: Auto Adjust
SETUP MENUS Auto Adjust Automatically adjust Clock, Phase, H-Position and V-Position settings. In order to get a good result, you should open a "filling the screen" picture before executing Auto Adjust. H.Position Shift the screen slightly to left or right. V.Position Shift the screen slightly up or down. -
Page 40: Color Temperature
SETUP MENUS Phase Adjust the DB15 picture signal sampling phase. It maybe affect the definition. Wrong value maybe result the interference. Reset Reset the parameters of current menu to default value. Adjusting VGA Settings 1 Use the keys to select VGA Settings and press 2 Press the keys on the remote control to select the desired option. -
Page 41: Advanced Picture Settings
SETUP MENUS Advanced Picture Settings • Dynamic Contrast (Off/On) The system will adjust the luminance curve by analyzing the picture content dynamically. • Film Mode (Off/On) For the 2:2 or 3:2 format signal of cinema, enable special pixel process to reduce the flick of moving area. -
Page 42: Sound
SETUP MENUS SOUND Use the Sound sub-menus to configure the sound quality. Press on the remote control or MENU on the control panel to display the setup menu screen then select Sound to display the Sound sub-menu. The following options are available: Sound Settings, Analog Sound, Digital Sound, Digital Audio Output, Equalizer Settings, and SRS TruSurround Settings. -
Page 43: Sound Mode
SETUP MENUS Sound mode Use this sub-menu to select one of four preset view options optimized for different listening conditions. The following options are available: • Standard: Select for standard picture. • Soft: Select for a finely detailed picture. • User: Select for standard picture. - Page 44 SETUP MENUS Balance Use Balance to adjust the sound balance between the L/R speakers. Adjusting Balance 1 Use the keys to select Balance and press 2 Press the keys on the remote control to adjust the Balance level. 3 Press to save and exit the screen.
-
Page 45: Equalizer Settings
SETUP MENUS Equalizer Settings Use this sub-menu to select one of four preset audio options optimized for different sounding conditions. The following options are available: • Rock: Sets the equalizer to the Rock mode. • Pop: Sets the equalizer to the Pop mode. •... -
Page 46: Channel
SETUP MENUS CHANNEL Use the Channel sub-menus to configure the channel. Press on the remote control or MENU on the control panel to display the setup menu screen then select Channel to display the Channel sub-menu. The following options are available: Channel List, Favorite List, Channel Settings, Signal Type, Auto Channel Search. -
Page 47: Favorite List
SETUP MENUS Favorite List All of you favorite channels are listed in this menu, and you can choose them quickly. Channel Setting Set the favorite channels, skipped channels, label of channels. • Skip: Set the channel to be skipped when using CH+/CH- to view channels. •... -
Page 48: Signal Type
SETUP MENUS Change the settings • Skip & Favorite Press to select the channel you want to set. Press to highlight corresponding item, and press SELECT to set or cancel. • Label Press to select the channel and SELECT to enter the edit state. Press to select the character, press to move the cursor. -
Page 49: Parental Control
SETUP MENUS PARENTAL CONTROL Use the Channel sub-menus to configure the parental control. Press on the remote control or MENU on the control panel to display the setup menu screen then select Parental Control to display the Parental Control sub- menu. - Page 50 SETUP MENUS Rating Description TV-Y Suitable for young children. TV-Y7 May not be suitable for children under 7. TV-G Suitable for all audiences. TV-PG Parental guidance suggested. TV-14 Parental guidance suggested for children under 14. Suitable for mature audiences only; may be unsuitable for children TV-MA under 17.
- Page 51 SETUP MENUS Rating Description May contain some adult material. Parents are urged to learn more about the film before letting their children view it. May contain explicit sex scenes, an accumulation of sexually-oriented language, and/or scenes of NC-17 excessive violence. Suitable for adult audiences only.
- Page 52 SETUP MENUS – Canada French: Use this sub-menu to select the ratings of allowable TV programs and movies. These ratings are based on the classification categories determined by La Régie du cinéma du Québec. Rating Description Exempt shows For general audiences. 8 ans + Not suitable for children under 8 years of age.
-
Page 53: Change Password
SETUP MENUS Change Password Change Password allows you to change your current password. Changing Password 1 Use the keys to select Change Password and press 2 Use the Channel keys to enter the current password and press 3 Use the Channel keys to enter the new password and press 4 Use the Channel keys to enter the new password again for confirmation and press 5 Press... -
Page 54: Setup
SETUP MENUS SETUP Use the Settings sub-menus to configure the LED TV operational setup and view the current firmware version. Press on the remote control or MENU on the control panel to display the setup menu screen then select Setup to display the Settings sub-menu. The following options are available: Closed Captions, Menu Language, Clock, OSD Timer, Power Light. - Page 55 SETUP MENUS • Digital CC Preset (Default/Custom) If set to Custom, Digital CC Style is available. The following options are available: – Closed Captions: Can be set to ON or OFF. – Analog Type: Can be set to CC1,CC2, CC3, CC4, T1, T2, T3, or T4. –...
-
Page 56: Menu Language
SETUP MENUS Menu Language Use Menu Language to select the language to display on the screen: English, French, or Spanish. Adjusting Menu Language 1 Use the keys to select Menu Language and press 2 Press the keys on the remote control to select English, French or Spanish. -
Page 57: Osd Timer
SETUP MENUS • Setup Time Set Auto Clock to Off, then you can set the time manually . NOTE: In the case of loss of power, the clock setting will be lost. • Day of Week The TV will calculate current day of week according to the time. •... -
Page 58: Others
SETUP MENUS OTHERS Blue Back Set the screen background color blue or not when no valid signal input. When analog TV input and has no signal, snow noise will display if this option is cleared. No Signal Power Off If it is set, TV will automatically enter standby after 10 minutes without signal input. No Operation Power Off If it is set, TV will automatically enter standby after 3 hours without any operation. -
Page 59: Wall Mount Option
WALL MOUNT OPTION WALL MOUNT OPTION The LED TV has been fitted with VESA FPMPMI compliant mounting holes. These 200 x 100 mm mounting holes allow the unit to be mounted on a wall. Use the four M4 x L10 mm screws to wall mount the LED TV. DC IN TUNER AUDIO IN... -
Page 60: Troubleshooting
TROUBLESHOOTING TROUBLESHOOTING Problem Corrective Action • Make sure the power indicator is illuminated blue. • Make sure the power cord is securely connected to the AC-in jack and is plugged No power into a functional AC outlet. You may want to plug in another electrical device to the power outlet to verify that it is supplying the proper voltage. - Page 61 TROUBLESHOOTING Problem Corrective Action • Make sure the VGA cable is properly No picture or the No connected to the LED TV’s VGA port. Signal message appears when a • Decrease the video resolution setting on the VGA cable is computer and try again.
- Page 62 TROUBLESHOOTING Problem Corrective Action • Make sure the audio input cable is properly connected to the correct terminal, and that the correct input mode is enabled. • The volume may be muted, press or Vol+ key to turn on the volume. •...
-
Page 63: Specifications
SPECIFICATIONS SPECIFICATIONS Item Specification Model Name EW32S5UW Active Area 697.685 (H) x 392.256 (V) (Diagonal, mm) Resolution 1366 (H) x 768 (V) Contrast Ratio 3000:1 (min) Panel Response Time 6.5ms(g-g) (min) Aspect Ratio 1.77 (16:9) Display color 16.7M • HDMI x2 •... - Page 64 SPECIFICATIONS Item Specification With stand: 749.84mm x 503.57mm x 159.8mm Dimensions (WxHxD) Physical Without stand: Specifications 749.84mm x 458.85mm x 52mm Weight (Net) 6.19Kg Weight (Gross) 8.6Kg NOTES: • These product specifications are subject to change without user notification. • Do not set your computer graphics card to exceed the unit’s refresh rates;...