Page of 66

Westinghouse Digital UW46T7HW User Manual

UW46T7HW

   Summary of Contents for Westinghouse Digital UW46T7HW

  • Page 1

    UW46T7HW...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS TABLE OF CONTENTS ..............i DIGITAL TELEVISION TRANSITION NOTICE ......1 ENERGY STAR DISCLAIMER ............. 1 IMPORTANT INFORMATION............2 Warnings .................. 2 NOTICES ................. 3 FCC COMPLIANCE STATEMENT .......... 4 IMPORTANT SAFETY INSTRUCTIONS ......... 5 Circuit Overload................ 6 Power Cord Protection .............

  • Page 3: Table Of Contents

    TABLE OF CONTENTS POWER CONNECTION ............. 20 CONNECTING AC POWER........... 20 INITIAL SETUP ..............20 ANTENNA OR COAXIAL CABLE CONNECTION SETUP ..21 CABLE OR SATELLITE BOX CONNECTION SETUP ..24 OTHER INPUT SOURCE CONNECTION SETUP ....26 WESTINGHOUSE HDTV SETUP - NOT THROUGH CABLE/ SATELLITE BOX..............

  • Page 4: Digital Television Transition Notice

    DIGITAL TELEVISION TRANSITION NOTICE This device contains a digital television tuner, so it should receive digital over the air TV programming, with a suitable antenna, after the end of full-power analog TV broadcasting in the United States on June 12, 2009. The nationwide switch to digital television broadcasting will be complete on June 12, 2009, but your local television stations may switch sooner.

  • Page 5: Important Information, Warnings

    IMPORTANT INFORMATION To reduce the risk of fire or electric shock: • Do not expose this product to rain or moisture. • Do not remove the rear cover. There are no user-serviceable parts inside. Refer all servicing requirements to qualified service personnel. •...

  • Page 6: Notices

    IMPORTANT INFORMATION Important Notices Concerning Power Cord Selection The specific power cord for this LED TV is enclosed and has been selected according to the country of destination. Use the enclosed power cord to prevent electric shock. Observe the following guidelines if it is necessary to replace the original cord set, or if there is no cord set enclosed.

  • Page 7

    IMPORTANT INFORMATION This equipment has been tested and complies with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and may cause harmful interference to radio communications if not installed and used in accordance with the instructions.

  • Page 8: Ventilation, Lightning

    IMPORTANT INFORMATION Make sure to note and follow all warnings and instructions marked on the LED TV. Observe the following safety instructions. • Read these instructions. • Keep these instructions. • Read all warnings. • Follow all instructions. • Do not use this apparatus near water. •...

  • Page 9

    IMPORTANT INFORMATION Do not overload wall outlets, extension cords, or power strips. This can result in a fire or electronic shock. Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Periodically inspect the cords for damage.

  • Page 10

    IMPORTANT INFORMATION • Do not orient the LED TV towards direct sunlight to reduce glare. • If the LED TV will not be used for a long period of time, unplug the unit and remove the batteries from the remote control. •...

  • Page 11: Power Lines

    IMPORTANT INFORMATION Outdoor Antenna Grounding If an outside antenna or cable system is connected to the LED TV, be sure the antenna or cable system is grounded to prevent voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANS/NFPA 70, provides information on proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

  • Page 12

    IMPORTANT INFORMATION • Make sure the LED TV is turned off and the power cord is disconnected from the power outlet. • Never spray or pour any liquid directly onto the screen or the case. To clean the screen: 1 Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.

  • Page 13: Package Contents

    PACKAGE CONTENTS 46” LED TV Unit Remote Control (with 2x AAA batteries) LED TV Base User Manual Power Cord Warranty Card AC Adapter Quick Connect Guide Screw for Base Screws for Base...

  • Page 14: Control Panel

    CONTROL PANEL Item Description 1. Power Toggles the power on and off.

  • Page 15: Terminals

    TERMINALS A UD IO IN VI DEO L IN R L OUT R Item Function Connects the AC to DC adapter from this outlet to a power 1. DC IN source 2. COAX OUT Connects to an external analog audio receiver Connects to an external AV device such as a VCR, DVD player, 3.

  • Page 16: Remote Control

    REMOTE CONTROL...

  • Page 17: Remote Control Operation

    REMOTE CONTROL OPERATION CAUTIONS: • Only use AAA batteries. • Do not mix new and old batteries. This may result in cracking or leakage, which may pose a fire risk or lead to personal injury. • Insert batteries according to the (+) and (-) markings. Inserting the batteries incorrectly may result in cracking or leakage, which may pose a risk of fire or lead to physical injury.

  • Page 18: Led Tv Base.

    LED TV BASE CAUTION: The LED TV unit may be too heavy for one person to lift. If this is the case, make sure to ask for assistance in handling the LED TV to prevent physical injury and/or damage to the unit. Open the LED TV carton box.

  • Page 19

    LED TV BASE If you intend to repack the LED TV unit (for shipping or storage) or you want to change the installation to a wall mount option, you must first remove the LED TV base. Turn off the LED TV and all connected devices. Disconnect the power cord from the LED TV.

  • Page 20: Antenna Connection

    ANTENNA CONNECTION Cable TV lead in VHF, UHF or VHF/UHF combination antenna 75 ohm coaxial cable (round) RF IN 300-75 ohm ADAPTER 300 ohm twin-lead (flat) (Not supplied) Separate VHF/UHF Antenna VHF Antenna UHF Antenna Home Antenna terminal (75 ohm) 300 ohm twin-lead COMBINER (Not supplied) 300 ohm twin-lead...

  • Page 21: External Device Connections

    EXTERNAL DEVICE CONNECTIONS • A position on the RF switch (not supplied) – You can view all unscrambled channels by using the TV's channel keys. • B position on the RF switch (not supplied) – You can view the scrambled channels via the converter/descrambler by using the converter's channel keys.

  • Page 22

    EXTERNAL DEVICE CONNECTIONS The following diagram shows the external device connections. Power outlet AC to DC adapter Audio cable Audio amplifier Audio out RGB cable DVI-HDMI cable 3.5 mm stereo DVD player with a mini jack cable DVI terminal Power outlet Antenna cable / Cable TV line DVI-HDMI...

  • Page 23: Power Connection

    POWER CONNECTION IMPORTANT: The LED TV is designed to be powered via an AC adapter. Use ONLY the AC adapter included in the package. Turn off all connected devices before plugging the AC adapter into the power outlet. Connect the power cord of the AC adapter to the LED TV then to a proper AC outlet. Press on the control panel or on the remote control to turn on the LED TV.

  • Page 24

    POWER CONNECTION Select Language Use remote control to select the language to be used for menus and messages. Press SELECT to continue. Time Zone Use remote control to select your local time zone. Select “Next” and then press SELECT to continue. Press Go Back to return to the previous screen.

  • Page 25

    POWER CONNECTION Select Channel Scan Type Use remote control to select the channel scan type. Press SELECT to continue. Press Go Back to return to the previous screen. NOTE: Antenna users selecting to scan Over- the-Air ATSC channels need a Channel Access Code in order to perform a channel scan and receive broadcast signals.

  • Page 26

    POWER CONNECTION Channel Scan in progress The channel scan may take a while to complete. When the scan is complete, you will be able to watch your local TV programming.

  • Page 27

    POWER CONNECTION Select Language Use remote control to select the language to be used for menus and messages. Press SELECT to continue. Time Zone Use remote control to select your local time zone. Press SELECT to continue. Press Go Back to return to the previous screen. Power On Mode Use remote control to select the power on mode.

  • Page 28

    POWER CONNECTION Cable/Satellite Box Input Use remote control to select the input connected to the set top box. Press SELECT to continue. Press Go Back to return to the previous screen. RF Warning Use the up and down arrows on your HDTV control panel or remote control to select.

  • Page 29

    POWER CONNECTION Select Language Use remote control to select the language to be used for menus and messages. Press SELECT to continue. Time Zone Use remote control to select your local time zone. Press SELECT to continue. Press Go Back to return to the previous screen. Power On Mode Use remote control to select the power on mode.

  • Page 30

    POWER CONNECTION Select Input Source Use remote control to select the input source. Press SELECT to continue. Press Go Back to return to the previous screen.

  • Page 31

    POWER CONNECTION Select Language Use remote control to select the language to be used for menus and messages. Press SELECT to continue. Time Zone Use remote control to select your local time zone. Press SELECT to continue. Press Go Back to return to the previous screen. Power On Mode Use remote control to select the power on mode.

  • Page 32

    POWER CONNECTION Let’s Get Connected Select “Click here to connect a Game, Blu-Ray, DVD, or other player.” and press SELECT on your remote control. Press SELECT to continue. Press Go Back to return to the previous screen. Select Input Source Use the keys on your remote control to select the input source.

  • Page 33: Basic Operations

    BASIC OPERATIONS Turning on the power Press on the control panel or on the remote control to turn on the LED TV. Turning off the power Press on the control panel or on the remote control to turn off the LED TV. The LED behavior will depend on the enabled Power settings.

  • Page 34

    BASIC OPERATIONS Follow the instructions below to change channels. Using the Ch Buttons Browse channels To browse through the available channels, press Ch the remote control or on the control panel. Using the Channel Keys Selecting channel To change to a certain channel, key in the channel number using the channel keys and press ENT.

  • Page 35

    BASIC OPERATIONS Using the Input Key Select source using Input Key 1 Press Input. 2 A list of supported video sources is displayed. 3 Press to select the preferred source. 4 Press to switch to the selected input source. The input source can sometimes affect the way images are displayed on-screen. You can adjust the display format to view the image properly.

  • Page 36: Setup Menus

    SETUP MENUS Use the setup menus to configure the various operational settings of the LED TV. Displaying the setup menu screen Press on the remote control or MENU on the control panel to display the setup menu screen. Navigating the setup menu screen Use the buttons on the remote control or on the control panel to navigate through the menu screens.

  • Page 37: Picture, Sound, Channel, Setup, Channel

    SETUP MENUS Use the Picture sub-menus to configure the display quality. Press on the remote control to display the setup menu screen then select Picture to display the Picture sub-menu. The following options are available: Picture Mode, Sound, Time, Setup, Lock, Channel. Picture Settings Adjust the picture quality including brightness, contrast, color, tint, sharpness.

  • Page 38

    SETUP MENUS Picture mode Use this sub-menu to select one of four preset view options optimized for different viewing conditions. The following options are available: • Energy Star: Select for power saving picture. • Retail: Select for enhanced picture contrast and sharpness •...

  • Page 39

    SETUP MENUS Color Use Color to adjust the color intensity. Adjusting Color 1 Use the keys to select Color and press 2 Press the keys on the remote control to adjust the Color level. 3 Press to save and exit the screen. Tint Use Hue to adjust the balance of the red, green, and blue colors in the display.

  • Page 40

    SETUP MENUS Advanced Settings Press to selet the display aspect ratio till the picture is fit onto the screen. The options are different according to different input source. • Use the keys to select Noise Reduction, Press to select Low Medium and High •...

  • Page 41

    SETUP MENUS Use the Sound sub-menus to configure the sound quality. Press on the remote control to display the setup menu screen then select Sound to display the Sound sub-menu. The following options are available: Equalizer, MTS, Audio Language, Digital Audio Output, AVL, Surround HD. Equalizer Use this sub-menu to select one of four preset audio options optimized for different sounding conditions.

  • Page 42

    SETUP MENUS The following options are available: • Mono: Allows mono output (useful when stereo is noisy or inconsistent). • Stereo: Allows stereo sound for superior TV viewing experience. SAP: Allows second audio program from the speakers while watching a scene •...

  • Page 43

    SETUP MENUS Use the Time sub-menus to configure the Time setting. Sleep Timer The following options are available: • Sleep timer: Off/ 5 min / 10 min / 15 min / 30 min / 60 min / 90 min / 120 min / 180 min/ 240 min/ Adjusting Time 1 Use the...

  • Page 44

    SETUP MENUS Daylight Saving Time 1 Use the Keys to select Daylight Saving Time and press 2 Press repeatedly to check(enable) or uncheck(disable) Adjust for Daylight Saving Time. 3 Press to save and exit the screen. Time Format (12-hour/ 24-hour) Auto Clock (On/Off) If set it to On , the TV will sync the local clock according to the DTV broadcasting time automatically.

  • Page 45

    SETUP MENUS Use the Settings sub-menus to configure the LED TV operational setup and view the current firmware version. Press on the remote control to display the setup menu screen then select Setup to display the Settings sub-menu. The following options are available: Menu Language, OSD Timeout, Closed Caption, Other Settings, Restore Default.

  • Page 46

    SETUP MENUS Adjusting OSD Timeout 1 Use the keys to select OSD Timeout and press. 2 Press the keys on the remote control to select 5 sec, 15 sec, 30 sec, or 45 sec, 60 sec. 3 Press to save and exit the screen. Closed Captions Use Closed Captions to configure the settings for closed captioning in TV programs.

  • Page 47

    SETUP MENUS • Digital CC Applies only to digital channels with closed caption. Service1,2,3,4,5,6: These are different service data channels. • Option The following options are available: – Mode: Can be set to Default or Custom. – Font Style: Can be set to as Default, Font 1, Font 2, Font 3, Font 4, Font 5, Font 6, or Font 7, Font 0.

  • Page 48

    SETUP MENUS Adjusting Closed Captions Settings 1 Use the keys to select Closed Captions and press 2 Use the keys to select the desired Closed Captions option. 3 Use the keys to adjust the value. 4 Press to save and exit the screen. VGA Settings Use VGA Settings to configure the settings for closed captioning in TV programs.

  • Page 49

    SETUP MENUS Other Settings Use Other Settings to configure the settings for audio On/Off in TV programs. 1 Use the keys to select Other Settings and press 2 Press the keys on the remote control to adjust the Audio on/off. 3 For Audio Onl y On/ Off Restore Default 1 Use the...

  • Page 50

    SETUP MENUS Press to select the source you want to lock, then press SELECT to set it to lock. If anyone want to use this source, the password is needed. Change Password Change Password allows you to change your current password. The following options are available: •...

  • Page 51

    SETUP MENUS Changing Password 1 Use the keys to select Change Password and press 2 Use the Channel keys to enter the current password and press 3 Use the Channel keys to enter the new password and press 4 Use the Channel keys to enter the new password again for confirmation and press 5 Press to save and exit the screen.

  • Page 52

    SETUP MENUS Changing Input Block 1 Use the keys to select Input Source and press. 2 Use the keys to select Unblock/Block and press 3 Press to save and exit the screen. US Rating Rating system used at USA. TV Rating: Use this sub-menu to customize US TV Rating programs. –...

  • Page 53

    SETUP MENUS – MPAA: Use this sub-menu to select the ratings of allowable movies. Rating Description Contains nothing most parents will consider offensive for even their youngest children to see or hear; suitable for young children. May contain some material parents might not like to expose to their young children-material that will clearly need to be examined or inquired about before children are allowed to view the film.

  • Page 54

    SETUP MENUS • Canada Rating Rating system used at Canada. – Canada English: Use this sub-menu to select the classification categories (based on Canadian ratings) of allowable TV programs and movies.

  • Page 55

    SETUP MENUS Rating Description Suitable for viewing by children of all ages. Not suitable for children under 8 years of age. Suitable for general audiences. Parental guidance advised. Suitable for people 14 years of age or older. Suitable for people 18 years of age or older. –...

  • Page 56

    SETUP MENUS Use the Channel sub-menus to configure the channel. Press on the remote control to display the setup menu screen then select Channel to display the Channel sub-menu. The following options are available: Signal Type, Auto Scan, Favorite, Channel List, Show/Hide, Channel Number, Channel Label.

  • Page 57

    SETUP MENUS Auto Scan Select Auto Scan and press ENT. Two options are available: • Are you sure to auto Scan? • Auto Search automatically creates a list of receivable channels for the selected source. Favorite List The following options are available: Channel, Channel Label, Favorite, Prev, Next. All of your favorite channels are listed in this menu, and you can choose them quickly.

  • Page 58

    SETUP MENUS Channel List The following options are available: Press change Channel, Channel Label, Prev, Next. You can view all the channels and choose one quickly. "CH-1": Label of the Channel Show/Hide The following options are available: Channel, Channel Label, Hide, Prev, Next.

  • Page 59

    SETUP MENUS Channel Number The TV screen shows current TV channel. Channel Label Rename label of the channel. .

  • Page 60: Wall Mount Option

    WALL MOUNT OPTION The LED TV has been fitted with VESA FPMPMI compliant mounting holes. These 200 x 100 mm mounting holes allow the unit to be mounted on a wall. Use the four M6 x L12 mm screws to wall mount the LED TV. •...

  • Page 61: Troubleshooting

    TROUBLESHOOTING Problem Corrective Action No power • Make sure the power indicator is illuminated blue. • Make sure the power cord is securely connected to the AC-in jack and is plugged into a functional AC outlet. You may want to plug in another electrical device to the power outlet to verify that it is supplying the proper voltage.

  • Page 62

    TROUBLESHOOTING Problem Corrective Action Picture is cut off or appear Press to adjust the Aspect ratio. in a sidebar screen. Poor image quality in TV • Check your antenna connection. If necessary, mode (cutoff picture, snowy rotate the antenna and wait up to ten seconds for images).

  • Page 63

    TROUBLESHOOTING Problem Corrective Action NOTES: If the problem condition persists even after performing the recommended corrective actions, contact us by: • Logging on to www.wde.com • Contacting the Westinghouse Customer Service at (800) 701-0680 or e-mail us at service@wde.com...

  • Page 64: Specifications

    SPECIFICATIONS Item Specification Model Name UW46T7HW Panel Active Area 1054.08 (H) x 592.92 (V) (Diagonal, mm) Resolution 1,920x1,080 Contrast Ratio (min) 4000:1 (typ.) Response Time 6.5ms (typ.) (min) Aspect Ratio 1.77 (16:9) Display color 8 bit Audio/Video • HDMI x2 Input/Output •...

  • Page 65

    SPECIFICATIONS Item Specification Physical Dimensions With stand: Specifications (WxHxD) 1060.56mm x 664.53mm x 173.98mm Without stand: 1060.56mm x 623.66mm x 53.94mm Weight (Net) 12.70 Kgs Weight (Gross) 16.96 Kgs NOTES: • These product specifications are subject to change without user notification. •...

This manual also for:

Uw39t7hw, Uw48t7hw

Comments to this Manuals

Symbols: 0
Latest comments:
  • RHYMER Oct 24, 2014 01:00:
    NO MTS ON SOUND SCREEN. HOW DO YOU GET OPTICAL OUTPUT TO EXTERNAL SPEAKERS