LG WD-803(4)0(W)(F)(H) Service Manual page 25

I WD-8030(W)(F)(H)/WD-8040W(F)(H)/WD-1042F(H)/WD-803(4)0F(H)B/WD-102(4)2F(H)B
If you press the Start/Pause button when an error in displayed, any error except
SENSOR PRESSURE S/W ERROR will disappear and the machine will change into pause status.
In case of SENSOR PRESSURE S/W ERROR, THERMISTOR ERROR if the error is not resolved
within 20 sec. In the case of other errors, if the error is not resolved within 4 min. power will be turned
off automatically and the error code will blink. But in case of OVER FLOW ERROR , power will not
be turned off.
ERROR
1 WATER INLET
ERROR
2 IMBALANCE
ERROR
3 DRAIN ERROR
4 OVERFLOW
ERROR
5 SENSOR PRESSURE
S/W ERROR
6 DOOR OPEN
ERROR
7 THERMISTOR
ERROR
SYMPTOM
Water has not reached to the pre-set level within 4 min. since
Pre
Main
The appliance is tilted.
Rinse Hold
Super
Laundry is gathered to one side.
Normal
Non-distributable things are put into the drum.
800 (1000)
Water has not drained enough within 5 min.
600 (800)
( ) :WD-1042F(H)
no Spin (600)
for
1000
WD-8030F(H)B
800
WD-8040F(H)B
600
WD-1022F(H)B
400
WD-1042F(H)B
no spin
Water is automatically being pumped out because too much
Coloreds
Whites
water is in the tub.
Rapid
Synthetic
The sensor pressure switch is out of order.
Wool
Delicate
The
The door switch is out of order.
Door Lock
95 C
The thermistor is out of order.
60 C
40 C
Cold
for
95
WD-8030F(H)B
60
WD-8040F(H)B
50
WD-1022F(H)B
40
WD-1042F(H)B
30
Cold
inlet valve operated, or water has not reached to the normal
level within 25 min.
Start/Pause
button is pressed with the door open.
24
CAUSE