Table of Contents
Advertisement
Encrypting the disk
Warning:
All resources on the hard disk will be deleted. (Resources residing in flash memory or in RAM remain
unaffected.)
Note: This setting is only available when a hard disk is installed.
1
Turn the printer off.
2
Press and hold
3
Release both buttons when Performing Self Test appears on the display.
The printer performs its power-on sequence, and then Config Menu appears on the first line of the display.
4
Press
until
5
Press
until
Contents will be lost. Continue? appears.
6
Press
until
The Encrypting Disk progress bar appears.
7
When disk encryption has finished, click
8
Press
until
To disable disk encryption:
1
Turn the printer off.
2
Press and hold
3
Release both buttons when Performing Self Test appears on the display.
The printer performs its power-on sequence, and then Config Menu appears on the first line of the display.
4
Press
until
5
Press
until
Contents will be lost. Continue? appears.
6
Press
until
The Encrypting Disk progress bar appears.
7
When disk encryption has finished, click
8
Press
until
Administrative support
and
while turning the printer on.
Disk Encryption appears, and then press
Enable appears, and then press
Yes appears, and then press
.
Exit Config Menu appears, and then press
and
while turning the printer on.
Disk Encryption appears, and then press
Disable appears, and then press
Yes appears, and then press
.
Exit Config Menu appears, and then press
Encrypting the disk
.
.
.
.
.
.
.
.
107
Advertisement
Table of Contents
