Samsung DVD-P355B/XEU Service Manual page 25

Disassembly and Reaasembly
4-2-4 Ass'y Housing Removal
1) Remove the 2 Soldering Œ. (TM+, TM-)
2) Push the 2 Hooks ´ in the direction of arrow "A" and remove Ass'y PCB Deck ˇ.
3) Push the Slider Housing ¨ in the direction arrow "B".
4) Push the 1 Hook ˆ in the direction of arrow "C" and lift up the Slider Housing ¨.
5) Remove the Belt Pulley Ø and 2 Screws ∏, Ass'y Motor Load ".
6) Push the 1 Hook ' in the direction of arrow "D" and lift up the Gear Pulley ˝, Gear Tray Ô.
¨ SLIDER HOUSING
"B"
Ø BELT PULLEY
∏ 2 SCREWS
Ô GEAR TRAY
˝ GEAR PULLEY
"D"
' 1 HOOK
"C"
ˆ 1 HOOK
" ASS'Y MOTOR LOAD
´ 2 HOOKS
"A"
"A"
ˇ ASS'Y PCB DECK
Π2 SOLDERING
Fig. 4-9 Ass'y Housing Removal
Samsung Electronics 4-9