Hitachi Travelstar 5K320 HTS543232L9A300 Manual page 153

The self-test routine in progress
15
14.40.2.5
This field tells the host how many seconds the device requires to complete the off-line data collection
activity.
14.40.2.6
This byte is a counter indicating the next segment to execute as an off-line data collection activity.
Because the number of segments is 1, 01h is always returned in this field.
14.40.2.7
Bit Definition
0 Execute Off-line Immediate implemented bit
0 S.M.A.R.T. Execute Off-line Immediate subcommand is not implemented
1 S.M.A.R.T. Execute Off-line Immediate subcommand is implemented
1 Enable/disable Automatic Off-line implemented bit
0 S.M.A.R.T. Enable/disable Automatic Off-line subcommand is not implemented
1 S.M.A.R.T. Enable/disable Automatic Off-line subcommand is implemented
2 abort/restart off-line by host bit
0 The device will suspend off-line data collection activity after an interrupting command and resume
it after some vendor specific event
1 The device will abort off-line data collection activity upon receipt of a new command
3 Off-line Read Scanning implemented bit
The device does not support Off-line Read Scanning
0
1 The device supports Off-line Read Scanning
4 Self-test implemented bit
0 Self-test routine is not implemented
1 Self-test routine is implemented
5 Reserved (0)
Selective self-test implemented bit
6
0 Selective self-test routine is not implemented
1 Selective self-test routine is implemented
7 Reserved (0)
14.40.2.8
This word of bit flags describes the S.M.A.R.T. capabilities of the device. The device will return 03h
indicating that the device will save its Attribute Values prior to going into a power saving mode and
supports the S.M.A.R.T. ENABLE/DISABLE ATTRIBUTE AUTOSAVE command.
Bit Definition
Pre-power mode attribute saving capability
0
If bit = 1, the device will save its Attribute Values prior to going into a power saving
mode (Standby or Sleep mode).
1 Attribute autosave capability
If bit = 1, the device supports the S.M.A.R.T. ENABLE/DISABLE ATTRIBUTE AUTOSAVE
command.
2-15 Reserved (0)
14.40.2.9
Bit Definition
7-1
Reserved (0)
0 Error Logging support bit
If bit = 1, the device supports the Error Logging
14.40.2.10
This byte indicates the section of self-test where the device detected a failure.
Total Time in Seconds to Complete Off-line Data
Collection Activity
Current Segment P
Off-Line Data Collection Cap
S.M.A.R.T. Cap
Error Logging Cap
Self-test failure check point
ointer
ability
ability
ability
153
5K320 SATA OEM Specification