Using The Touch Screen; Names Of Buttons And Functions On The Lcd Monitor - JVC Everio GZ-HM690 User Manual

Using the Touch Screen

Icon operation buttons, thumbnails, and menu items are displayed on the
touch screen according to the mode in use.
There are two ways to operate the touch screen, namely "tap" and "drag".
0
The following are some examples.
A Tap the displayed button (icon) or thumbnail (file) on the touch screen
to make selection.
B Drag the thumbnails on the touch screen to search for the desired file.
.
Memo :
The touch screen of this unit is pressure-sensitive. When the touch screen
0
does not respond smoothly, apply slightly more force to your fingertip.
Tap the buttons (icons) on the touch screen accurately. The buttons may
0
not respond if they are not tapped on the right area.
Do not press or rub with excessive force.
0
If you apply a protect sheet or a sticker, the touch screen may not respond
0
smoothly.
Do not operate the touch screen using an object with a sharp or hard tip.
0
Pressing two or more places at a time may cause a malfunction.
0
Perform "TOUCH SCREEN ADJUST" if the reactive area of the screen is
0
misaligned with the touched area. (Adjust by lightly tapping with a corner
of an SD card, etc. Do not press with an object with a sharp tip or do not
press hard.)
"TOUCH SCREEN ADJUST" (A p. 98)

Names of Buttons and Functions on the LCD Monitor

The following screens are displayed during the video and still image modes,
and operate as the touch screens.
Recording Screen (Video/Still Image)
.
1 Face Short Cut Menu Button
Displays a short cut screen of face recognition functions.
0
"Operating the Face Short Cut Menu" (A p. 75)
2 Zoom Button
"Zooming" (A p. 27)
Playback Mode Button
3
Switches to the playback mode.
0
Recording Start/Stop Button
4
g: Video Recording Start Button
0
a: Video Recording Stop Button
0
Q: Still Image Recording Button
0
Menu Button
5
"Operating the Menu" (A p. 75)
6 Display Button
Some displays disappear after approximately 3 seconds.
Use the n button to change the displays as shown below.
Tap n button
0
Displays appear for approximately 3 seconds with every tap.
Tap and hold n button
0
Displays are fixed such that they do not disappear. After setting, the
display button changes from n to m.
Tap m to release the displays.
Playback Screen (Video)
.
1 Recording Mode Button
Switches to the recording mode.
0
2 Index Screen Button
"Operation Buttons for Video Playback" (A p. 50)
3 Delete Button
"Deleting the Currently Displayed File" (A p. 57)
4 Volume Adjustment Button
"Adjusting the Volume of Videos" (A p. 50)
5 Menu Button
"Operating the Menu" (A p. 75)
6 Operation Buttons
"Operation Buttons for Video Playback" (A p. 50)
Playback Screen (Still Image)
.
1 Recording Mode Button
Switches to the recording mode.
0
Index Screen Button
2
"Operation Buttons for Still Image Playback" (A p. 52)
3 Delete Button
"Deleting the Currently Displayed File" (A p. 57)
Menu Button
4
"Operating the Menu" (A p. 75)
5 Operation Buttons
"Operation Buttons for Still Image Playback" (A p. 52)
Getting Started
19