Advertisement
Replacing the Crossfader
Technical Specifications - model XDM-241
Inputs:
Microphone
Phono
Line
Output
Frequency range
Distortion
S/N-ratio
Tone control
Headphone impedance
Power supply
Dimensions
Weight
Specifications subject to change without notice. XDM-241 User Instructions page 5
Instructions for replacing the crossfader:
• Disconnect from main power supply
• Remove the fader knob.
• Remove the two outer screws.
• Take the fader out and unplug the connection cable.
• Connect the new fader and replace back into mixer.
IMPORTANT! • Only replace cross fader with American DJ® high quality
1.5mV, 600 Ohm
3mV, 47kOhm
150mV, 27kOhm
7V, peak to peak
20Hz-20KHz, ± 2dB
<0.08%
>70dB
Treble: 10Khz ± 12dB
Bass: 100 Hz ± 12dB
16 Ohms
DC 12V 500mA
6.5" W x 8.75" D x 3.75" H
211 x 114 x 285 mm
3.5 lbs. / 1.5 kg
© American DJ® AUDIO Los Angeles, CA 90058 USA
Feather Fader™ (FF-1).
Advertisement
