Haier HW-C1260TVE-U Service Manual page 22

Front Load Washing Machine
Error message. Motor overheat protection or is damaged.
Troubleshooting:
Cut off power and check if motor wires
are connected well
Y
Measure if resistance of motor winding by
multimeter,is it as followed?
1-2(between white and
3-5(between brown and
4-5(between blue and
7-8(between grey and black): 4 0Ω
Y
Pull out the wire connection of motor and
computer board.Then check if circuit is open
by multimeter
N
Turn on power and set spin mode,then
start.Check the import
between red wire and red wires, is it
between 220-240V?
N
white):5Ω
red):3.4Ω
red):2.9Ω
Y
voltage
Model:HW-C1260/1460TVE/ME-U
Reconnect well
N
Put the motor in nomal temperature about
Repair wires
Replace computer
Y
board
18
ten minutes,and then test again.If the
resistance is natural, it is caused by
overheated protection.Then check
deal with overload,abnormal voltage.If
not,please replace motor
and