Leveling The Dryer - LG DLEY1201 Owner's Manual

14
INSTALLATION INSTRUCTIONS
Clearances
(¢onf,)
RECOMMENDED INSTALLATION SPACING FOR CABINET INSTALLATION
. For cabinet installation with a door, minimum ventilation openings in the top of the cabinet are required.
*Required spacing
**For side or bottom venting,
2 inches (5.1 cm) spacing is allowed.
.__..._'*(17F.b>C .6cm!7"* (17.6 cm)
1'211_ 27"_11-_ 1"
(2.54 cm) (68.6 cm) (2.54 cm)
Leveling fhe dryer
&WARNING
• To reduce the risk of injury to persons, adhere to all industry
recommended safety procedures including the use of
long sleeved gloves and safety glasses. Failure to follow this
warning can cause serious injury or death.
• The appliances are heavy. Two or more people are required
when installing the dryer. Failure to follow this warning can
cause serious injury or death.
To ensure that the dryer provides optimal drying performance,
it must be level.To minimize vibration, noise, and unwanted
movement, the floor must be a perfectly level, solid surface.
@ NOTE
...........................................................................
Adjust the leveling feet only as far as necessary to level the
dryer. Extending the leveling feet more than necessary can
cause the dryer to vibrate.
, All four leveling feet must rest solidly on the floor. Gently push
on the top corners of the dryer to make sure that the dryer does
not rock from corner to corner.
If you are installing the dryer on the optional pedestal, you must
use the leveling feet on the pedestal to level the dryer.The dryer
leveling feet should be fully retracted.
2. Use an adjustable wrench to turn the leveling feet.Turn
clockwise to raise the dryer or counterclockwise to lower it.
Raise or lower the leveling feet until dryer is level from side to
side and front to back.
Make sure that all 4 leveling feet are in firm contact with the floor.
1. Position the dryer in the final location. Place a level across the
top of the dryer.
ii .....................
-Level
Leveling Feet