Canon LEGRIA HFM36 Instruction Manual page 172

Printer in use
- The printer is in use. Check the printer status.
Printing error
- The printer does not support the paper size selected for [Paper Settings]. Set [Paper Settings]
to [Default] or a paper size supported by the printer used.
- Cancel printing, disconnect the USB cable and turn off the printer. After a while, turn the
printer back on and reconnect the USB cable. Check the printer status.
NOTES
About Canon Inkjet/SELPHY DS Printers: If the printer's error indicator flashes
or an error message appears on the printer's operation panel, refer to the
printer's instruction manual.
• If you cannot solve the problem even after consulting this list and the
printer's instruction manual, contact the closest Canon Service Center
(refer to the list included with the printer).

172
Additional Information