Indicators; Power Saving Function - Canon Digital IXUS 960 IS User Manual

Indicators

The indicators on the back of the camera light or blink under the
following conditions.
Right Indicator
Green:
Blinking Green:
Orange:
Blinking Orange: Ready to shoot (camera shake warning)
Left Indicator
Yellow:
Blinking Yellow:
Never do the following while the indicator blinks green. These
actions may corrupt image data.
- Shake or jolt the camera
- Turn off the camera, or open the memory card slot/battery
cover

Power Saving Function

This camera is equipped with a power saving function. The power will
shut off in the following circumstances. Press the power button again to
restore power.
Shooting Mode
Playback Mode
Connected to a Printer
* This time can be changed.
The power saving function will not activate during a slide
show or while the camera is connected to a computer.
The power saving function settings can be changed
Ready to shoot (camera beeps twice)
Time Lapse (movie) recording/Image recording/
reading/erasing/transferring (when connected to a
computer/printer)
Ready to shoot (flash on)
Macro mode/infinity mode/AF lock mode
Focusing difficulty (camera beeps once)
Powers down approximately 3 minutes after the
last control is accessed on the camera. The LCD
monitor automatically turns off 1 minute* after the
last control is accessed even if [Auto Power Down]
is set to [Off]. Press any button other than the
power button or change the camera orientation to
turn the LCD monitor back on.
Powers down approximately 5 minutes after the
last control is accessed on the camera.
Components Guide
(p. 51).
45