Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Cambo Manuals
  4. Digital Camera
  5. X2-PRO
  6. Main operating instructions

Cambo X2-PRO Main Operating Instructions

Technical camera
Hide thumbs
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual
MAIN OPERATING INSTRUCTIONS
X2-PRO
Digital Solutions

Advertisement

loading

Related Manuals for Cambo X2-PRO

Summary of Contents for Cambo X2-PRO

  • Page 1 MAIN OPERATING INSTRUCTIONS X2-PRO Digital Solutions...

  • Page 2: List Of Functions

    1. INTRODUCTION Cambo now introduces the new generation technical camera that combines the latest technology of today’s digital SLR cameras with full lens shift and tilt possibilities. These instructions give short information about the main functions of this new photographic system.

  • Page 3: Camera Assembly

    26. Scale Rise & Fall (Lateral Shift) INSTRUCTIONS These instructions describe the main functions of the X2-PRO camera system. Firstly the set-up of the camera in general is described. Then the possible lenses and interfaces are presented. Finally the way to work with this new camera system is pointed out.
  • Page 4 (extending the camera). For macro purposes and the 150mm lenses a macroconverter is available (see Mounting Lensboard to Camera Be sure that the X2-Pro camera is mounted correctly and stable to avoid damaging your lenses / equipment. Take the Lensboard and place it behind the Base Bracket (9) of the Lens Plate Housing (4).

  • Page 5: Camera Functions

    Rear standard. macro converter on X2-Pro Camera Functions After assembling the camera parts, Lensplate and DSLR camera your X2-Pro camera system is ready to be used. In the following instructions the main camera movements and features are described. Focusing The Shift Profile makes a linear movement perpendicular to the chip surface.
  • Page 6 The second column (1) is used for the Lateral Shift and tilt movements. The Shift Knob (2) gives 18mm left and right and the tilt range is like the swing 20 degrees both ways using the Tilt Knob (3). In the following overview of the “Basic View Camera Movements” the use of the specific movements are explained.

  • Page 7: Specifications

    September 2006 This Specification-sheet is prepared by Cambo with care, although no responsibility, financial or otherwise, is accepted for any consequences arising out of the use of this manual or this material. All specifications in this manual are subject to change without notice.