Setup And Programming; Definition - Stealth Cam STC-U732IR Instruction Manual

SETUP AND PROGRAMMING
When the camera is first turned on, the internal LCD screen displays
the camera status. The following information is present on this screen.
( PIR MODE) ( TIME LAPSE MODE)
If no buttons are pressed after 30 seconds the LCD screen will power
down to conserve battery life and enter 1 minute count down to enter
PIR detection mode. To re‐power the display screen, press and hold
the UP or DOWN button until you see the status screen.
Definition
•
Day and Time: Displays the date and time that you have set.
•
Operation mode:
PIR: Camera takes Image/Video per PIR trigger.
Time Lapse (tLS): Camera takes the still image per preset time.
•
Capturing Sequence mode:
1P ‐ 9P: 1 to 9 burst mode image capturing per PIR trigger.
Video: 10 to 180 seconds' adjustable video per PIR trigger.
•
Resolution for Images: Color Daytime / Black & White Nighttime
3 Stars (7Mp): Select this option to capture a
7.0M pixels image. (High image quality)
WWW.STEALTHCAM.NET
Toll Free 877-269-8490
NOTE: When the camera detects low batteries, the camera unit will
power off within 30 seconds automatically. Please replace with new
batteries; otherwise the camera may not work properly.
Setting the Camera's Operation Mode:
Your Stealth Cam can be programmed to operation either in PIR
Detection mode or Time Lapse mode.
•
Switch the camera to the ON position.
LCD screen will display the camera status screen.
•
Press the [MENU] button once within 30 seconds to enter the
programming mode, the word PIR or tLS will be blinking.
•
Press the [UP] or [DN] button to select the PIR or tLS.
•
Press [OK] to save your selection.
•
Press [MENU] button to exit.
Setting the Camera's Resolution in PIR operation mode:
Your Stealth Cam can be programmed to 3 different resolutions,
High (3 Stars‐7Mp), Low (2 Stars–3Mp), Base (1 Star–1.3Mp).
WWW.STEALTHCAM.NET
Toll Free 877-269-8490
2 Stars (3Mp): Select this option to capture a 3.0M pixels
image. (Low image quality)
1 Star (1.3Mp): Select this option to capture a 1.3M pixels
image. (Base image quality) (Default)
•
Resolution for Video: Color Daytime / Black & White Nighttime
VGA: 640x480 *ONLY resolution*
•
Time out: To set the amount of time in seconds and minutes the
camera will sleep between PIR triggering.
•
Moon phase: Displays the moon phases.
•
Temp stamp: Temperature stamp will display on still images and
first frame only on video files.
•
Zoom: Digital enhancements to different zoom level.
1X: Normal – the word "ZOOM" will not display.
2X: Two times zoom – the word "ZOOM" will display.
4X: Four times zoom – The word "ZOOM" will blink.
•
Battery Status: Shows the battery status.
Full: The battery is full.
Low: The battery is low. (Front Low Battery indicator will also
blink.)
WWW.STEALTHCAM.NET
13
Toll Free 877-269-8490
•
Switch the camera to the ON position.
LCD screen will display the camera status screen.
•
Press the [MENU] button once within 30 seconds to enter the
programming mode.
•
The word PIR will be blinking, press OK to confirm the camera
operation by PIR detection.
•
The word CAMERA and the STARS will be blinking.
•
Press the [OK] button ONCE to choose the selection.
•
Press the [UP] or [DN] button to select the desired resolution.
•
Press [OK] to save your selection.
•
Press [MENU] button to exit.
WWW.STEALTHCAM.NET
15
Toll Free 877-269-8490
14
16