Stealth Cam STC-I890 User Manual page 34

video OUT jack on the camera. Insert the other end into the RCA
video IN jack on the TV. Make sure to switch to VIDEO IN mode
on your TV. (See your TV owner's manual for directions)
Turn on the TV monitor and slide the camera power switch to TEST.

Your camera is preset to NTSC TV out system by default.

Press the OK button on the camera. This will display the last image
captured.

Using the LEFT/RIGHT buttons to select the image you wish to
view. Image number and total number of images in memory will
display on the center bottom of the screen.

Once you have selected the image you wish to view, press the UP
button. This will magnify the image on the screen.

Using LEFT/RIGHT/UP/DOWN buttons, you can move the image
to display different areas of the image.

To return to the image selection view from the magnified image
screen, press the OK button.
Viewing AVI Clip on a hand held TV or home TV monitor
www.stealthcam.net
STC-I890
Toll Free 877-269-8490
34