v The IR Emitter will only activate in low light conditions.
Using the camera in manual shoot mode
Open the front housing and turn the camera on.
•
Close the front housing. The camera is now ready to be used
•
as hand held point and shoot camera.
The manual mode setting will perform the programmed setting
•
above. For example, if you program to capture 3 image burst
mode or a 10 second video, each time you press the manual
shutter button, it will capture 3 images or a 10 second video
clip respectively.
Above operation must be done within 30 seconds after you
•
power up the camera. Once it is in count down mode, you will
not be able to perform Manual shooting mode.
www.stealthcam.net
STC-DVIR8
Toll Free 877-269-8490
25