Stealth Cam STC-DVIR4 User Manual page 23

the desired coverage area is achieved.

When you have completed testing the coverage area, there are
2 methods to exit the test mode:
a. Option 1: Open the front housing and press the [TEST]
button to exit test mode. The camera will then enter
countdown mode for 1 minute and the front green indicator
will start blinking, giving you 1 minute to leave the coverage
area. The camera will then enter PIR detection mode.
b. Option 2: As a safety precaution, if you did not push the
test button to exit the test mode as shown in option 1
above, the camera will automatically enter the 1 minute
countdown mode after it is left in test mode for 5 minutes.
Camera will then enter PIR detection mode.
www.stealthcam.net
STC-DVIR4
Toll Free 877-269-8490
23