Display > G-Pilot - Navman G-PILOT 3380 Operation Manual

4-2 Display > G-PILOT
Displays an advanced G-PILOT display with essential G-PILOT data.
Display area
Data Header
1
Heading
2
Drive
3
indicators
Numerical data
4
panels
Bar data
5
panels
Mode panel
6
Options menu:
Header Menu for configuring the data header in this
display (see section 5).
Data setup Enters the data set-up mode. Use the
Control Dial to highlight a data cell, press
list of data types that can be displayed in that cell.
G-PILOT 3380 and Operation Manual
Function
Customizable data cells. Each display page has a separate header
configuration. Default: Voltage, Current, Alarm Status (see section 5).
Large digits show the heading of the vessel
Left and right boxes 'fill up' to indicate when the G-PILOT is driving the
rudder and how much power is being used by the drive system
Customizable data cells. Default: Course to steer, Course error.
Customizable indicator bar. Default: Automatically switches between
Rudder angle, Course error and Cross track error.
Left hand side: shows the steering mode (COMPASS, GPS, WIND)
Right hand side: shows the operating mode (Standby, Auto, H-Steer)
inside a colored tab.
Panel changes to blue when in AUTO mode. The colored tab is yellow in
STBY mode, green in AUTO mode, magenta in H-STEER mode and red
when there is a critical alarm.
to display a
G-PILOT displays
NAVMAN
1
2
3
4
5
6
25