Alerts And Warning During Measurement; Overload Alert; Input Warning; Figure 2-16 Input Terminal Warning - Agilent Technologies U1251B User's And Service Manual

Alerts and Warning During Measurement

Overload alert

WA R N I N G

Input warning

Agilent U1251B/U1252B User's and Service Guide
For your safety, look out for this alert. When you are alerted,
immediately remove the test leads from the measuring source.
The meter provides an overload alert for voltage
measurements in both auto and manual range modes. The
meter beeps periodically once the measuring voltage exceeds
1010 V. For your safety, please be aware of this alert.
The meter sounds an alert beep when the test lead is
inserted into the A input terminal but the rotary switch is
not set to the corresponding mA.A location. The primary
display indicates a flashing "A- Err" until the test lead is
removed from the A input terminal. Refer to

Figure 2-16 Input terminal warning

Making Measurements 2
Figure 2- 16.
49