Kenmore 19502 Owner's Manual page 21

Prepare the Bobbin (Continued)
5ensQr5em 7 n
Bobbin
winder
stopper
..,1. ¢
NOTE; The Pattern Indicator will read "SP" to show the machine is
winding the bobbin,
7, Press the foot control gentty to start the machine.
NOTE; After the bobbin is slightly filled0 stop and dip the thread coming
from the top of the bobbin.
8, Slowly start the machine again and wind the thread unlit the bobbin
slops.
9. Push the bobbin winder spindle to the left and clip the thread,
10. Remove the bobbin.
! 1. Push in the clutch to put power back into the needle,
NOTE: If you do not push Jn the dutch, the machine wit] not run when
you press the foot control
2O